Easy Guide on how to install MB SD C4 Batteries

The newest MB SD Connect C4 wireless Star diagnosis with V2015.07 software HDD has been come out. Do you know how to use it? To install batteries is the first step you have to do. Here is the detailed instruction help to install MB SD C4 batteries.

1. Please prepare the following tools:
http://forobd2tool.com/wp-content/uploads/2017/08/2/25-1.jpg
①— SD connect multiplexer which need to input the batteries。
②— 6 units Ni-MH Rechargeable batteries,Size:AA, Voltage:1.2V, Capacity:above 1700mA。
③— 1 unit 108M WIFI Card。
④— Plum screwdriver,Specification:T-20

2.Take out the rubber:
2.1 Use the T20 Plum screwdriver to take out the screws as below.

http://forobd2tool.com/wp-content/uploads/2017/08/2/25-2.jpg

2.2 Take out the rubber as below.

http://forobd2tool.com/wp-content/uploads/2017/08/2/25-3.jpg

①— Batteries Space.
②— WIFI Card Space.
③— SD Card Space.

3. Insert the Rechargeable batteries.
3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.
http://forobd2tool.com/wp-content/uploads/2017/08/2/25-4.jpg

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.
http://forobd2tool.com/wp-content/uploads/2017/08/2/25-5.jpg

3.3 Insert the batteries. Note the Battery polarity.
http://forobd2tool.com/wp-content/uploads/2017/08/2/25-6.jpg

3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries.
http://forobd2tool.com/wp-content/uploads/2017/08/2/25-7.jpg

3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished.
http://forobd2tool.com/wp-content/uploads/2017/08/2/25-8.jpg

4. Installing WIFI Card.
4.1 Inserting the Auto Scanner Tool WIFI Card into the WIFI Card Space. Please make the correct direction.
http://forobd2tool.com/wp-content/uploads/2017/08/2/25-9.jpg

4.2 Push it to make it totally connected.
http://forobd2tool.com/wp-content/uploads/2017/08/2/25-10.jpg

4.3 Cover the rubber and fix the screws to finish all the work.
http://forobd2tool.com/wp-content/uploads/2017/08/2/25-11.jpg

That’s all about how to install MB SD Connect C4 diagnosis by Automotive Scanners

Be the first to comment

Leave a Reply

Your email address will not be published.


*