On Autel Maxisys Pro MS908P or Maxisys Mini, the network connection is fine, but when going to Update page, it says “Network not available, please check the network”.
1 Enter Root Explorer/mnt/sdcard/scan/menu and check if there is “init.xml” file. If there is the file, just delete it. Then enter the menu again to make sure if it is deleted successfully.
2.If the network is still not available, please select the Maxisys icon on the main screen. Then hold it and move it to the top where you can see App info, force stop the process of Maxisys and clear the data. Then try to update again.
If cannot solve the problem, send S/N to Autel engineer to check if the scanner is genuine.
Besides, update server is OK, please try to update it again with stable network connection.
When I use the Autel MaxiSys Mini MS905, the error message “Unfortunately, maxisys has stopped” on the table.
Just try the following steps:
1 Connect Maxisys mini to PC via USB cable.
2 Turn on USB storage on the msxisys.
3 Wait for several seconds and turn off USB storage.
4 Restart the scanner and try again.
CGDI MB latest version V184.108.40.206 is confirmed to program new keys via K-line to 202/208/210, 203/463/639 when all keys are lost.
Free download Cgdi mb 220.127.116.11 software:
Confirmed to work with cgdi mb hardware:
CGDI mb V18.104.22.168 released notes on 19th Dec,2018
1. Added K-line all lost collection support EIS Model
2. Optimize the Keyless repeatedly plug collecting process
Fix problems that can cause program errors in specific situations in the collection.
3. Optimize network connectivity and improve server connectivity stability.
4. Software display language increases regional restrictions.
Real opinions from users:
the difference between CGDI and VVDI in FBS4 is as follows:
On one hand,
CGDI MB can read FBS4 keys and knows if its in a working status or key is damaged;
CGDI can read EIS FBS4 and knows if it working or not working; however, VVDI can not Detect FBS4 .
On the other hand,
CGDI never claimed that it can make calculation for FBS4 . Only Read to know the status. Out of the subject No one was Born knowing everything at one point we all asked for questions to know.
Both CGDI and Vvdi MB are a great comprehensive solution comparing to what else is available out there.
In my opinion they’re the two best for keys maybe along with Diagspeed but much far ahead than AVDI (for keys).
with 655$ i earned 11000€ with cgdi !!! Well with vvdi always must to pay extra to make akl and one more thing ,, the server is very old on vvdi and sometimes have problems like cgdi !!!
So conclusion is only one !!! 655$ comparing with 2000$ its very big difference !!!
Both tools are good ,but people don’t know how to use it at full capacity!
i read somewhere that cgdi mb tool can make it and it is much cheaper tool from xhorse vvdi mb tool !!
Fbs4 it can read eis ID via obd and read key via IR but that’s it, can’t make a new key or calculate anything.
The main difference between cgdi mb and vvdi mb is that, on old Mercedes, cgdi mb is able to OBD program a new key while you have to disassemble EIS to add a new key with vvdi mb tool. That is why you should have a cgdi programmer for mb.
With VVDI MB Tool, you should buy Vvdi prog too, because the are some eis and ecu’s that you cant do with MB Tool independently. For example some w210 eis or Sprinter 906. You should have both, VVDI MB Tool and VVDI prog. Or, if you have to buy some tool again, Simon Touch is the best, but its more expensive.
But if you have a CGDI MB, you have a chance to program a new key through OBD. All done with a tool. That’s the reason why I bought it.
Look here: CGDI MB key programmer read FBS4 key data successfully!
So there is no tool can do FBS4 key?
No. With genuine xentry and daimler fbs server. Makes FBS4 every day via OBD very fast and easy.
Diagspeed announced the dates of FBS4 solution. But not confirmed yet. The Diagspeed has the reputation of being the best in the Mercedes world to make keys, Reset ECU’s and trouble shoot problems that a normal scan tool can not. It is worth to take a gamble.
Xhorse VVDI2 experience :
Yesterday I added key successful on VW TIGUAN MQB (2015)
1)read & save eeprom
2)read &save immo data
3) make dealer key
5) add key :
a) method 1
b) give ignition with each key
WORK DONE on 15 minutes
Another test: I also did a Audi A3 65 plate 2015, MQB add remote key same procedure. With needles not virtual dash.
VVDI2 and MQB question and answers:
How can i save the immo data ?
Where is the save immo data button ?
the same button when you save eeprom data
When you read immo data just click on save file … Like save eeprom data
Was the meter with needle or cetais electronic tablet style?
so you had to pull needles to read eeprom? and why eeprom was it?
no FREIND all was done via OBD and eeprom was 24xxx
24c64 or 24c32
correct, VW Tiguan is only MQB from 2016+ (second generation)
Hold two buttons marked red above at the same time.
Delete current APK V2.1
After uninstall Lonsdor K518 APK successfully, click the arrow in the middle of the screen.
There is a new version APK v2.26 available to update
Kernel mirror image version under V2.26 needs to follow this step. Press Update Online on the bottom left.
Install the package after downloading. It might take a long tome, please be patient. After installation, there are “WIFI Setting” and “Update”, just click “Update”. if you failed to update, change a network or change the domain name according to the file of “WIFI Setting”.
Select repair function
If the device shows interface below, continue to follow next step.
The operation will erase old APK data and reinstall APK.
Select Reset to factory setting
Install APK success
Enter 6-digit password
It will work as usual.
CGDI Prog MB software v22.214.171.124 adds Mercedes Benz old K-line vehicle key programming. Here’s the guide on adding new keys to w202 w208 w210 kline MB 38pin car from 1997 to 1998 via OBD.
Original car key
New key to be programmed
Step 1: Calculate Password
Connect CGDI Prog with laptop and vehicle
Open CGDI MB software
Go to EIS->Read EIS data
Select Computer Password-> Copy key with key-> Collect data
Select key type: Other keys
Follow 7 steps below to collect data
1.Insert original key into EIS and press OK
This is a k-line EIS, the operation is different from the ordinary EIS.
2.Insert key into CGDI MB and wait for collection
3.Insert the car key into EIS 10s and remove
Make sure to twise the key to ON position and turn on insturment. If failed to do this, pull ouit the ey
and try again. Press OK to continue.
4.Insert the key into EIS
5. Remove the key for 5s and then insert the key into EIS
6.Insert the key into CGDI MB
7. Save the generated files
Save the file successfully. Upload the data to calculate password.
Select Upload Data
Upload data just saved
Upload data successfully. Press Query Results to calculate pass
Calculate password success.
Copy and paste the pass to EIS Key password area
Save EIS data
Step 2: Generate EE
Select Generate EE->V051-> Load EIS file
Upload EIS file just saved
Press Generate Key File
The key file was generated successfully
Step 3: Write Key
Go to Read/Write Key->IR
Insert new key into CGDI Prog device
Press Read Key/Chip
Smart key choose 41 format, common key and BE key cchoose 51 format.
Select a key file
Write key success.
Test the new key. Works good.
1st,you need to download skp900_unlimited_tokens file from beneath hyperlink.
Free of charge download: SKP900 limitless tokens files
Tutorial: SKP900 limitless tokens from 0 token
Step 1: insert usb, stay on primary super obd screen
Step two: start out “SKP900 UPDATE TOOL V2.four.exe” open “Update V5.0.bin” along with the detect port and update. the update can take upto 40mins so be patient.
Step 3: now open “0_token_patch.bin” and update.
Step four: when total, tap yes button on skp900 and after that choose “IMMOBILIZER” and scroll to “CHRYSLER” tap yes then tap yes on “IMMOBILZER(RFH)
Step 5: in the event you see “IMMOBILIZER SYSTEM” you now have an limitless token skp900
Step 6: i’ve added update tool v2.five in case anybody requires it..
Contributor: urcarpc (quite a few a lot of many thanks)
Big Due to the skp900 limitless tokens option provider Asaad Asaad from digital-kao forum.
CGDI MB AC adapter can collect data via OBD for the these Mercedes Benz models: W164 W204 W221 W209 W246 W251 W166.
CGDI MB Data Collection Adapter Features:
Acquire data via OBD at a quick speed
No need to dismantle EIS
No need to plug and insert the cable
Save much data acquisition time
Workable Models and the data acquisition time:
Mercedes Benz S series W221, EIS 216: acquisition time 12 minutes
Mercedes Benz E series 221, EIS 211: acquisition time 9 minutes
Mercedes Benz C series W209, EIS 209: acquisition time 9 minutes
Mercedes Benz B series W246, EIS 169: acquisition time 35 minutes
Mercedes Benz A series W246, EIS 169: acquisition time 35 minutes
Mercedes Benz R series W251, EIS 164905: acquisition time 12 minutes
Mercedes Benz ML series 164, EIS 164905: acquisition time 12 minutes
Mercedes Benz GL series 166, EIS 164905: acquisition time 12 minutes