How to Virgin ME2.8 ECU and Code with MB Star DAS

ME 2.8 ECUs are used in many Mercedes Benz models with M112/3 engines.  The old ECU is damaged. You need to make virgin (renew it) and code it by MB Star diagnostic DAS or Vediamo.
cgdi-mb-renew-me-28-ecu-1 (2)
Part 1: Renew ME 2.8 with CGDI MB
Remove ME 2.8 ECU from MB (i.e a W203)
CGDI Prog MB software 3.0.2.0 adds the ME2.8 ECU wiring diagram
cgdi-mb-renew-me-28-ecu-2 (2)
Follow wiring diagram to connect MB Bosch ME 2.8 ECU with CGDI
cgdi-mb-renew-me-28-ecu-3 (2)
Run CGDI MB software
Select Auto Computer function
Read ECU
cgdi-mb-renew-me-28-ecu-4 (2)

Get erase password
cgdi-mb-renew-me-28-ecu-5 (2)
Get erase password success.
Press Erase
cgdi-mb-renew-me-28-ecu-6 (2)
Erase/Renew ECU completed
cgdi-mb-renew-me-28-ecu-7 (2)

cgdi-mb-renew-me-28-ecu-8 (2)
Re-Install ME 2.8 ECU back to vehicle
cgdi-mb-renew-me-28-ecu-9 (2)

Part 2: Adapt ME 2.8 with DAS
Using MB Star Xentry to program a virgin ECU to an existing EIS.
Connect MB SD Connect C4 multiplexer with vehicle via OBD socket via LAN cable
Turn on ignition switch
Identify vehicle
Select Control Unit Groups-> Drive->ME2-SFI- Motor electronics-> ME-SFI 2.8-Motor electronics 2.8-> Control Unit adaptation->Learning processes
mb-star-das-adapt-me-28-ecu-1 (2)

mb-star-das-adapt-me-28-ecu-0 (2)

Teach in of drive authorization system

mb-star-das-adapt-me-28-ecu-3 (2)
mb-star-das-adapt-me-28-ecu-4 (2)

Press F1 to continue
Enter VIN as 17-digit code
mb-star-das-adapt-me-28-ecu-5 (2)
Personalizing
Switch off ignition and then switch on
mb-star-das-adapt-me-28-ecu-6 (2)

Start the engine
Personalizing in process, wait about 30s
mb-star-das-adapt-me-28-ecu-7 (2)
Is this engine control module to remain fitted in the vehicle?
Press Yes to continue
mb-star-das-adapt-me-28-ecu-8 (2)

The engine control module is irrevocably assigned to the vehicle.
Do you wish to activate control module ME-SFI 2.8?
Press Yes to continue
mb-star-das-adapt-me-28-ecu-9 (2)
Activating module in process

mb-star-das-adapt-me-28-ecu-10 (2)
The learning process has been performed.
mb-star-das-adapt-me-28-ecu-11 (2)
The ME 2.8 ECU virgin ME adaption learning process is completed.

Be the first to comment

Leave a Reply

Your email address will not be published.


*