Program Ford Focus Used ABS Module with VXDIAG IDS

It is enough to allow me to think that there is a chance of success after I swap out the ABS ECU with the one I ordered. You’ll need access to FJDS or IDS to finish the job. You can ask your dealer to do this, or you can purchase a license from Ford and do it yourself. If you decide to do it yourself, you’ll need a VXDIAG or VCM II adaptor.

I ordered the VXDIAG VCX NANO for Ford interface.  I downloaded FJDS from motorcraftservice. I was able to see the J2534 Pass-thru Device in the list. There is a VCI manager app that you will need load to connect for it to be recognized.

It’s finally working!
As far as the VCX NANO is concerned, it works. The cracked version of IDS that comes with it might not work with the newer vehicles, but if you purchase a license from motorcraftservice and download FJDS, you can use the malware of a “driver” that is included with it to connect to your vehicle.

It helped us diagnose an F-150 2019 yesterday.  Today we have 2008 ford focus. The ABS module was replaced and is required to be programmed.

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-1

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-2

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-3

Run IDS, Start a new session- All other

Detect vehicle information

Confirm VIN

Go to Major programming-Module Programming- ABS

Turn ignition switch to ON

Turn ignition off

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-4

install a new module in the vehicle

Turn ignition switch to ON

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-5

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-6

We are required to input as-built data

Go to motorcraftservice website

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-7

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-8

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-9

Select region and language, then Submit

Go to Free Resources- Quick Guide- Module Build Data (As-built)

IDS showed me the VIN number

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-10

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-11
Input VIN and it give me vehicle data

pull down and check ABS data, take a picture of the data

go back to IDS

manually enter ABS as-built data completely

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-12

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-13

Turn ignition off

Turn the key on

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-14

ABS Programming complete by vxdiag ford ids

Just run a self test to see what code is here

you see now here we have abs code and the other one this one is internal fault

i’m gonna clear the codes

there’s no ABS light anymore

checking your light because you have to start the car too.

Program-Ford-Focus-Used-ABS-Module-with-VXDIAG-IDS-15

Be the first to comment

Leave a Reply

Your email address will not be published.


*