Getting Started of the MS906

1. Powering Up

Press the Lock/Power button on the top right side of the display tablet to switch the unit on. The system boots up, and shows the lock screen. Press and drag the inner ring to the edge of the circle to unlock the screen; the Autel MaxiSYS MS906 Job Menu is shown.

10-1

1.    Application Buttons
2.    Locator and Navigation Buttons
3.    Status Icons

NOTE: The screen is locked by default when you first turn on the display tablet. It is recommended to lock the screen to protect information in the system and reduce battery usage.

Almost all operations on the display tablet are controlled through the touch screen. The touch screen navigation is menu driven, which allows you to quickly locate the test procedure, or data that you need, through a s eries of choices and questions. Detailed descriptions of the menu structures are found in the chapters for the various applications.

1.1 Application Buttons

The Application buttons configure the Maxisys for the type of operation or activity to be performed. The table below gives brief descriptions of the available applications.
Use your finger tip to select an application from the Job Menu.

10-2
10-3

1.2 Locator and Navigation Buttons

10-4
10-5
To use the camera:
1.    Tap the Camera button. The camera screen opens.
2.    Focus the image to be captured in the view finder.
3.    Tap the inner blue circle. The view finder now shows the captured picture and auto-saves the taken photo.
4.    Tap the thumbnail image on the top right corner of the screen to view the stored image.
5.    Tap the Back or Home button to exit the camera application.

1.3 System Status Icons

These are the standard status icons of the Android operating system. Your display tablet is a fully functional Android Pad. Refer to Android documentation for additional information.
By tapping on this area (bottom right corner), a S hortcuts Panel will be displayed, on which you are allowed to set various system settings of the tablet. Operations of each button on the panel are described in the table below:

10-6

2. Powering Down

All vehicle communications must be terminated before shutting down the display tablet. A warning message displays if you attempt to shut down while the display tablet is communicating with the vehicle. Forcing a shut down while communicating may lead to ECM problems on some vehicles. Exit the Diagnostics application before powering down.

To power down the display tablet:
1.    Press and hold the Lock/Power Button.
2.    Tap Power off option.
3.    Tap OK; the tablet will turn off in a few seconds.

2.1 Reboot System

In case of system crash, press and hold the Lock/Power button for 8 seconds to reboot the system.

3 Installing Computer Software

The MaxiSys Diagnostic Platform allows you to realize some of its functions on a c omputer to enhance capabilities and i mprove user experience. To realize these functions on a computer, you need to install certain software.
There are two Setup.exe program packages contained in the CD provided with the MaxiSys tool kit. The packages include the following applications:

To install the Setup.exe program
1.    Insert the CD into the CD-ROM of the computer. The driver installation wizard will load momentarily.
2.    Click on Next on the welcome page.
3.    Click the Change button, and select a destination folder to install the program, and click Next to continue. Or directly click Next to continue without changing the default installation folder.
4.    Click Install and the Setup.exe program will be installed onto the computer.

3.1 Printing Operation

This section describes how to receive file from the display tablet and perform printing through the computer:

To perform printing through the computer
1.    Install the PC Link (Printing Services program) to the computer.
2.    Make sure the obd2tool.com MS906 tablet is connected to the computer network, either via Wi-Fi or LAN, before printing.
3.    Run the Printing Services program on the computer.
4.    Tap the Print button on the toolbar displayed in various applications of the MaxiSys system. A temporary file will be created and sent to
5.    Click the Printer Server tab on the top of the program interface on the computer, and wait for the printing file to load.
6.    Click the Print button to start printing.

Autel MaxiSYS MS906 Diagnostic Scanner

14-1

Autel is a leading company experienced in producing professional diagnostic tools, equipment and accessories in the automotive aftermarket. Focused on the orientation of “value innovation and assiduous pursuit”, Autel has always adhered to deliver easier diagnostic solutions and long-time value to customers worldwide.

MaxiSYS MS906 is an advanced diagnostic tool developed for mechanics looking for a scanner with ultra-convenient and modern design while delivering ultimate performance. Featuring the Samsung 6-core processor, an 8.0 inch LED capacitive touch screen, Android multitasking operating system and the exceptional OE-level diagnostics, this diagnostic scanner MS906 is absolutely an ideal solution to manage your repair jobs smartly and conveniently with greater integration.

14-2

ECU Coding & Special Functions
The scan tool provides you with quick access to all vehicle systems for various service and maintenance performances as followings.
1. Oil Reset Service to reset service mileage and service intervals for the Engine Oil Life system;
2. TPMS Service to look up the tire sensor IDs from ECU, as well as to perform TPMS programming and reset procedures after sensor replacements;
3. EPB Service to deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement, etc.;
4. ABS/SRS Services to perform bi-directional tests to check the operating conditions of ABS and SRS, such as Automated Bleeding, Pump Motor Test, and checking Module information, etc.;
5. SAS Service to perform calibration for the Steering Angle Sensor, and clear fault memory;
6. DPF Regeneration Service to clear the blockage through continuous burning of the particulate matter captured in the DPF filter.

14-3
Complete Diagnostic Functions for All Systems
With a wide range of capabilities, the MS906 will let you get more repair work done quickly and easily. Look what this diagnostic scan tool will bring to you.
Perform Complete Diagnostic Functions
1. Retrieve ECU information of tested control units including unit type, version numbers and other specifications;
2. Read all kinds of DTCs from vehicle’s control systems to locate problem areas, and offer possible solutions;
3. Erase the codes easily after DTCs retrieving and certain repairs have been carried out;
4. Live data of each parameter item displayed in analog, text, waveform graph, digital, or full screen display modes;
5. Active test used to access vehicle-specific subsystem and component tests.
In All Vehicle Systems on the ECUs
The diagnostic tool can access to ALL vehicle systems and subsystems, such as Body, Chassis,

14-4

Extension Usage
Powertrain, Network and etc., to perform a comprehensive scanning on ECUs to locate fault systems and retrieve DTCs.

Optional Accessories for Maximized Advantage of this Scanner
To help you get the most from MS906, there are many optional accessories to work with the diagnostic tablet. This diagnostic scanner offers you more potential functions of Autel TPMS Tool when working with the TPMS diagnostic tool MaxiTPMS TS401 from Autel.

Best Possible Hardware

The considerate grease and water resistant design are suitable for garage works; Samsung 6-Core processor operates quickly and reliably; 8-megapixel rear camera with autofocus and flashlight offers a good vision; 8.0” 1024×768 LED-backlit touchscreen works well for intuitive results display; 32GB SSD for better performance; 5000mAH lithium-polymer battery for flexible anytime use; Android Operating System lets you finish multitask in powerful yet simple ways.

14-5

Wide Vehicle Coverage

This OBD2 scan tool works on more than 80 US, Asian and European vehicle makes, and well combines with up to 12 kinds of adapters included in package. Even OBD-I complaint vehicles are perfectly supported by this diagnostic scanner when connecting via these adapters. Get one diagnostic scanner, and you can diagnose much more vehicles than using other diagnostic scan tools.

14-6

Convenient Information Management

MaxiFix, an online database to find diagnostic tips and proven filed fixes; Shop Manager is to well manage the workshop and customer information records, and those test vehicle history records; Data Manager to store, print, and review the saved files in different types; Data Logging to submit help requests for 48-hour replies; Notification Center to receive the latest service information like software update notification.

14-7 14-8

Package Contents

14-9