Free Download Porsche PIWIS III 38.250.000 for VXDIAG Porsche DoIP

The  VCX-DoIP Piws 3 is only Vxdiag J2534 tool supports Porsche PIWS 3 Software till now. The VXDIAG PIWIS3 software has released to newer version V38.250.000.
Free download VXDIAG Porsche PIWIS 3 software latest version 38.250.000:

https://mega.nz/#F!GZ401QjJ!mVbAaQM0e_7t1Ok1HOpXZA

porsche-piwis-3-mega-download

Date: 02-04-2018
Version: 38.250.000
Password: No
Image: piwis 38.250.000
Multi-language
porsche-piwis-3-v37-success
porsche-piwis-3-v37-success porsche-piwis-3-v38-download-1   1
porsche-piwis-3-v38-download-2
porsche-piwis-3-v38-download-3
porsche-piwis-3-v38-download-4
VXDIAG Porsche PIWIS III is good at maintenance, repair, control units change and programming & setting codes
New Piws 3 operation system and more intuitive diagnostic interface as Piwis III
VCX-DoIP Piws 3 Interface For Porsche post-2017 vehicles with DoIP diagnosis
VCX-DoIP J2534 Piws 3 VCI look for maintenance wiring diagram
VCX-DoIP Piws 3 login for online immobilizer programming
VCX-DoIP j2534 Piws 3 PST3 Interface support special functions like modification or flashing, with Engineering mode (Development version)
Developer mode enabled
Worked with new and old Porsche vehicles!
New & Old Cars:
All Porsche from 1998-2018:
Porsche 911(997) (991)
Boxster/Cayman (987)
Cayenne up to MY 2010
Cayenne from MY 2011
Panamera
Especially the latest models:
Paramera (971) 2018
Caynenne (92A) 2018
Macan (95B) 2018
911 (991) 2018
and other old models
www.obd2tool.com

VXDIAG Porsche Piwis3 Developer Mode shell config. update tips

Porsche Piwis3 Developer Mode:

The Developer Mode in Piwis 3 is not available when you update the shell, coz you lose the menu diagnostics configuration to switch between regular and developer mode,
Problem solved if you copy the old file com.porsche.piwis.Shell.exe.config

Here is how to update the shell config. and get the diagnostic configuration boxes back, on the system tab.

After a successful update from 37.250.20 you will loose the two above mentioned boxes from the System tab.
If you did not loose them, then the [PIDT] diagnostic software did not update completely.
So it’s a good thing to loose it !

Go to C:\PiwisApps\Shel\ and carefuly edit with notepad   this file –> com.porsche.piwis.Shell.exe.config

after the update the PIDT section shows up in green, after U edit it it will be blue.

First picture shows, red underlined, 2 places, beginning and the end of the green section, what to remove.
On top [Line 568 on mine] U delete  these four symbols       !–<     on the bottom [line 603 on mine] U delete these 3 symbols   –>
Then U save the config file.
Restart the PC and your Diagnostic config box for 991,981,970 and Diagnostic config for other models RE-APPEAR.

rm996 has the solution how get the developer functionality back up and running, !!! PM him.

[Similar solution for the lost with the Update Wiring Diagrams ]

piwis-3-Diag-Box1-back

Another tip might help you also.

It’s how to enable Developer Mode for Piwis 3

Developer mode is a special Piwis program that allow a lot of advanced coding normally reserved only to Factory.

With this function you will have a tool that can do more than software of official Porsche Dealer.
For example, you can reprogram all ECUs completely offline.

How to use Piwis Developer Mode:

Install winrar and winhex on your computer.

-1-locate the file c:\program files\porsche\PIDT_P_MIG_DLSS3\pidt\plugins\de.dsa.pidt.datatype.jar and copy it on your desktop in order to modify it.

Open it with winrar,in the wirar windows locate the file

\de\dsa\pidt\datatypes\utils\Helper$1.class and drag it on your destop , delete it from the archive after the copy, keep the winrar window open.

Open Helper$1.class on your desktop with winhex and goto offset E81, replace 9A by A7 and save.

Drag back the save file on the winrar windows still open and click OK.Close winrar

Copy the new file de.dsa.pidt.datatype.jar you just made in

c:\program files\porsche\PIDT_P_MIG_DLSS3\pidt\plugins, overwrite it.

copy the file aftersales.sig on your desktop and rename it development.sig.Copy this file back in the folder

Do exactly the same method given above with the folder c:\program files\porsche\PIDT_P_MIG_DLSS3 with its own files.

To transform it in developer :

Settings

Diagnostic configuration

981-991, mode, operating mode, E= development, P= production, V= aftersales ( Car Diagnostic Tool piwis)

Other models line, mode, operating mode, E= development, P= production, V= aftersales ( regular piwis)

This method to switch between regular and developer works only with my backup and will not work anymore after

an update.

Images:

porshce-piwis-developer-mode-1 porshce-piwis-developer-mode-2 porshce-piwis-developer-mode-3

Maybe this helps Folks some.

How to install Porsche PIWIS 3 on VAS6154 head

Look here: How to use VAS6154 head with Porsche Piwis 3

project PIWIS3 PT3G => VAS6154-Kolun a
look at below link when you take your right to use
1 have to have installed piwis 3 laptop.
2. install piwis 3 driver
3 put together vas6154 install the drivers for vas6154-piwis // attempt to update interface Flesch
, if you see 6154 as pt3g then it is ok if nevidi next step =>
4 separated you from laptop
5. Copy the deteskop and install VAS 6154 driver 3.0.2.807 // installation after installation tend to deteskopa the trash
6 interface connects you 6154
7 program you run driver
8 interface you see 6154
9 select USB. Save.
10 restart.
11 tart driver program tach app (the first option above left) choose passthru> pt3g-3 piwis install seeks interface.
12 restart
13 Interface joints run driver VAS6154 seen as a passthru pt3g update memory device, check the USB version pt3g dal see you ok almost 6154

Note: please be careful and do it on your own risk.
obdii365.com will not give support

Contributor: ibi1961

Update: Unless you find the 08 firmware
The picture below is VAS 6154

vas6154-porsche-piwis-3-1 vas6154-porsche-piwis-3-2 vas6154-porsche-piwis-3-3

VERY IMPORTANT:

For sake of security, you’re advised to use odis with vas6154 and use piwis with porsche tester 3

with relief!

Piwis III V37.250.020 – confirmed to work no issues with Vxdiag Porsche

Diagnostic test: passed

Coding: passed

Programming: passed

attached VAS 6154 driver download, installation instruction, wlan setup….

Porsche PIWIS III 38.250.000 Download Free

Free download Porsche Tester Piwis III software latest version 38.250.000:

https://mega.nz/#F!GZ401QjJ!mVbAaQM0e_7t1Ok1HOpXZA

porsche-piwis-3-v38-download-1
Date: 02-04-2018
Version: 38.250.000
Password: No
Activation: unknown
Expiration: unknown
Image: piwis 38.250.000

porsche-piwis-3-v38-download-2
porsche-piwis-3-v38-download-3
porsche-piwis-3-v38-download-4
porsche-piwis-3-v38-download-5
porsche-piwis-3-v38-download-6

Security: unknown! it’s your own risk!

To use with relief,

You’d better use a tested version Piwis 37.900 for Porsche diagnostics and programming

Piwis v37 has a good success with VXDIAG Porsche diagnostic tool

Good at maintenance, repair, control units change and programming & setting codes

New Piws 3 operation system and more intuitive diagnostic interface as Piwis III

VCX-DoIP Piws 3 Interface For Porsche post-2017 vehicles with DoIP diagnosis

VCX-DoIP J2534 Piws 3 VCI look for maintenance wiring diagram

VCX-DoIP Piws 3 login for online immobilizer programming

VCX-DoIP j2534 Piws 3 PST3 Interface support special functions like modification or flashing, with Engineering mode (Development version)

Developer mode enabled

Worked with new and old Porsche vehicles!

New & Old Cars:
All Porsche from 1998-2018:
Porsche 911(997) (991)
Boxster/Cayman (987)
Cayenne up to MY 2010
Cayenne from MY 2011
Panamera

Especially the latest models:

Paramera (971) 2018
Caynenne (92A) 2018
Macan (95B) 2018
911 (991) 2018
and other old models

VXDIAG Piwis 3 images:

porsche-piwis-3-v38-download-7 porsche-piwis-3-v38-download-8 porsche-piwis-3-v38-download-9 porsche-piwis-3-v38-download-10 porsche-piwis-3-v38-download-11

Piwis 3 Compare With Piwis Tester 2

As the Piwis III for Porsche diagnostic & programming released, most client inquiry for the Piwis 3 to replace Piwis tester ii for Porsche new models. Some client asks what’s the difference between Piwis Tester II & Piwis 3. whether the Piwis II work with the Piwis 3 software? Below Piwis-Tester-2.com share one client opinion for this.
Purchase Piwis 2 or Piwis 3?

piwis 2 & piwis 3 comparison

It may be an interesting subject, I’m sure there is some information about this out here.

First of all, the Piwis 2 interface is a lot more robust piece of equipment, compared to the cheesy and flimsy looking and feeling interface produced by Actia for Piwis 3.

Originally designed for the VW ODIS system, the VAS 6154 VCI is quite the service needy piece. [Breaks easily] not a hard comparison to make.
Is it worth to purchase Piwis 3 replace Piwis 2 now? Can the Piwis 2 compatible with Piwis 3 Software?

This answer for the question of whether Piwis 3 software can work with Piwis II Samtec HSX Interface from Piwis-Tester-2.com?

Secondly, I thought the Piwis 3 for Porsche went cheap. [my humble opinion, way below Porsche standard!]

At the same time, there is a service from Poland and Ukraine [If I remember correctly] that can make the Samtec based Piwis 2 VCI from Piwis-Tester-2.com, to work with Piwis 3.

Unfortunately, their charges are just as much and frankly cost prohibitive as the New Piwis 3 VCI. 2-3-4 thousand dollars for these VCIs is simply not reasonable for small operators.

They will come down in price just like the Chinese VCIs did for all manufacturers as the markets get saturated and folks are not buying them as eagerly as at the beginning of the Piwis 3 had.

They will get as much money as the market bares. [as much as people are willing to pay]

Your more pointed answers will not come in this tread Ibi. This is Cars Fan’s money-making tread, he will not volunteer any information, but if U start your own tread, U may be more likely to find out stuff.

Regards,

What Do the Piwis 3 updates replace Piwis 2?

Diagnostics application is used for communication with control units. You can search for, identify, code and control program units, read out the event memory, execute complex processes, change drive links and execute routines.

Guided fault finding (GFF) generates a test plan for a fault code. This test plan shows the best sequence for carrying out tests. GFF compiles a list of recommended tests, documents and wiring diagrams

Actual values/input signals functions display you the actual values and input signals of control units

Drive links/tests function displays the drive links of control units, allows you to change the parameters of these drive links and run test routines for individual control units

Maintenance/repairs function group – use this function to call up control unit-specific processes that cannot be implemented generically from the ODX data

Coding/programming function group – use this function to write coding values. Piwis 3 can code Values automatically or set manually. This function group includes (Automatic coding, Manual

coding, Customer-specific settings, and Factory settings) coding modes

Logging – use this function to activate logging for diagnostics, guided fault finding (GFF) and measuring equipment applications. Temporary and permanent working log can be created

Filter – use this function to limit the view of the control units installed in the vehicle. In the diagnostic application, you can create, edit, activate, deactivate or assign filters

Wiring diagrams application is the representation of physical connections and layouts of circuits

Measuring equipment interface work for DC and AC voltage measurement, direct and alternating current measurement, diode testing, resistance measurement, continuity/open circuit testing, showing voltage, current and resistance over time (oscilloscope function)

Any question about the Piwis 3 or Piwis 3 and Porsche Piwis Tester 2 comparison reviews, welcome to feedback to us.