Monthly Archives: May 2017

How to install the battery for 2017.03 mb star c4 diagnostic tool

by

mercedes benz diagnostic scanner mb star c4 newest version is 2017.03 , support WIFI,  do you know how to install mb star c4 batteries ? Here is the steps help you solve the battery installation problems.

1. Please prepare the following tools:

1

①— sd connect c4 multiplexer which need to input the batteries。
②— 6 units Ni-MH Rechargeable batteries，Size：AA， Voltage：1.2V，
Capacity：above 1700mA。
③— 1 unit 108M WIFI Card。
④— Plum screwdriver，Specification：T-20
2.Take out the rubber from sd connect c4 firmware :
2.1 Use the T20 Plum screwdriver to take out the screws as below.

2

2.2 Take out the rubber as below.

3

①— Batteries Space.
②— WIFI Card Space. ③— SD Card Space.
3. Insert the Rechargeable batteries.
3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.

4

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.

5

3.3 Insert the sd connect c4 battery. Note the Battery polarity.

6

3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries.

7

3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished for mercedes star diagnosis compact 4.

8

FVDI not work or driver won`t install, please check computer Config

by

FVDI 2016 not work or driver won`t install, please check computer Config

FVDI 2016 not work or driver won`t install? Then some user consider FVDI hardware is broken and send back to the seller for repair. Actually, www.obd2tool.com engineer tested and proved it’s not problem of hardware, but the compatibility of the computer and FVDI.

FVDI Commander 2016 computer configuration and operation system (OS)

1.CPU >=1.8 GHz , more than 2GB
2.OS: Windows XP, tested windows 7 32bit and prompt many system patches not found.
3.When update, if it prompts “Connecting to server…….failed” (See picture one).
Maybe the network connection is unstable, as the picture 2 shows, this user tried fine network connection when update, then get message “Connecting to server…….OK” and able to download firmware.

Real user’s Case to prove my opinion:
One user’s  FVDI 2016 not work, then contact our engineer to remote assist him, and find his computer is only with 768MB memory, use another higher configuration computer to install FVDI, finally FVDI 2015 works.
20-3

How to use 2015 FVDI software USB dongle

by


2016 FVDI commander comes with software USB dongle. Software USB dongle is capable of carrying out online function including:
1. AUDI A6/Q7 key learning
2. AUDI A6/Q7 VIN writing
3. AUDI A4/A5/A6/A8/Q5/Q7 component protection
4. AUDI A8, VW Touareg KESSY adaptation
5. VW MED17 EEPROM reading
6. BMW CAS3, encrypted CAS3+ key learning
7. BMW CAS3, encrypted CAS3+ mileage recalibration
8. Mercedes-Benz mileage recalibration
9. BWM CAS4 5M48h key Tool
10. Renault Key Learning for new model (2008~)
11. BMW EGS synchronization

How to use the FVDI software USB dongle:
1)Ensure there is good network connection environment
2)Run “ABRITES Quick start”. Select quick link icon on desktop and open “ABRITES quick”. Then select vehicle icon, software is running when the Dongle icon on the right-bottom of the desktop pops out.
3)Plug the software dongle into the computer/laptop
4)Run commander software
5)Because the Dongle and TAG key programmer connect to the same port of FVDI, so users cannot connect the USB Dongle and TAG software at the same time. When “Connect TAG programmer appears” message pops out, please disconnect the USB dongle as soon as possible and plug in the TAG key programmer quickly. After complete programming transponder, then connect the Dongle to carry out online function.

NOTE: FVDI ABRITES Commander can only work on Windows XP (SP2 or SP3). It cannot work on VISTA or WIN 7.

How to get 2015 FVDI additional software:
1) Order one FVID commander and pay authorization for the additional software you want, we will activate the software authorization for you.

2)Obd2tool.com has launched new 2015 FVDI with full 18 software with one year using limitation. After one year you need pay authorization fee again to continue use it. One year time calculate from the day you purchased it.