MaxiSys Elite Diagnostics Screen Layout

The Diagnostics screens typically include four sections.

28-1 28-2 28-3 28-4

1.Diagnostics Toolbar
2.Status Information Bar
3.Main Section
4.Functional Buttons

Diagnostics Toolbar

The MaxiSys Elite toolbar contains a number of buttons that allow you to print or save the displayed data and make other controls. The table below provides a brief description for the operations of the Diagnostics toolbar buttons:

28-2
28-3
28-4

To perform data printing in Diagnostics
1.Tap the Diagnostics application button from the MaxiSys Job Menu. The Print button on the diagnostic toolbar is available throughout the whole Diagnostics operations.
2.Tap Print whenever you want to make a printing. A drop-down menu appears.
1).Print This Page — prints a screenshot copy of the current screen
2).Print All Page – prints a PDF copy of all displayed data
3. A temporary file will be created and sent to the computer for printing.
4. When the file is transferred successfully, a confirmation message displays.
NOTE: Make sure the display tablet is connected to the computer network, either via Wi-Fi or LAN, before printing. For more instructions on printing, see Printing Operation on page 18 for detailed information.

To submit Data Logging reports in Diagnostics
a)Tap the Diagnostics application button from the MaxiSys Job Menu. The Autel Tool Data Logging button on the diagnostic toolbar is available throughout the whole Diagnostics operations.
b)Tap the Data Logging button whenever you want to commit recording for the system communication data. The button displays blue during the active recording process.
c)Tap the button again to finish recording. A submission form will display to let you fill in the report information.
d)Tap the Send button to submit the report form via the internet, a confirmation message displays when sending is successful.

Status Information Bar
The Status Information Bar at the top of the Main Section displays the following items:
1.Menu Title 一 indicates the menu subject of the Main Section
2.VCI Icon 一 indicates the communication status between the tablet and the VCI device
3.Battery Icon – indicates the battery status of the VEHICLE Main Section
The Main Section of the screen varies depending on the stage of operations. The main section can show vehicle identification selections, the main menu, test data, messages, instructions and other diagnostic information.

The Main Section of the screen varies depending on the stage of operations. The main section can show vehicle identification selections, the main menu, test data, messages, instructions and other diagnostic information.

Functional Buttons
The displayed Functional Buttons at this section of the screen varies depending on the stage of operations. They can be used to navigate, save or clear the diagnostic data, exit scanning as well as make other functional controls. The functions of these buttons will be introduced respectively in the following sections of the corresponding test operations.

Screen Messages
Screen messages appear when additional input is needed before proceeding. There are mainly three types of on-screen messages as to their purposes: Confirmation, Warning, and Error.

Confirmation Messages
This type of messages usually displays as an “Information” screen, which informs you when you are about to perform an action that cannot be reversed or when an action has been initiated and your confirmation is needed to continue.
When a user-response is not required to continue, the message displays briefly before automatically disappearing

Warning Messages
This type of messages informs you when completing the selected action may result in an irreversible change or loss of data. The typical example for this is the “Erase Codes” message.

Error Messages
Error messages inform you when a system or procedural error has occurred. Examples of possible errors include a disconnected cable or communication interruption due to certain reasons.

Making Selections
The Diagnostics application from www.cnautotool.com is a menu driven program that presents a series of choices one at a time. As you select from a menu, the next menu in the series displays. Each selection narrows the focus and leads to the desired test. Use your fingertip or the stylus pen to make menu selections.

MaxiSys Elite Powering Up

Press the Lock/Power button on the top right side of the display tablet to switch the unit on. The system boots up, and shows the lock screen. Pressing the inner ring with a Lock icon at the center displays 3 entry options:

1.Unlock – Drag the inner ring to the right edge of the circle to enter the Android System’s Home Screen.

2.MaxiSys — Drag the inner ring to the bottom edge of the circle to enter the MaxiSys Job Menu.

3.Camera – Drag the inner ring to the left edge of the circle to launch the camera.

20-1

1.Application Buttons

2.Locator and Navigation Buttons

3.System Status Icons

4.App Switcher

NOTE: The screen is locked by default when you first turn on the display tablet. It is recommended to lock the screen to protect information in the system and reduce battery usage.

Almost all operations on the display tablet are controlled through the touch screen. The Autel Scan Tool touch screen navigation is menu driven, which allows you to quickly locate the test procedure, or data that you need; through a series of choices and questions. Detailed descriptions of the menu structures are found in the chapters for the various applications.

Application Buttons

The Application buttons configure the Autel MaxiSYS Elite Scan Tool for the type of operation or activity to be performed. The table below gives brief descriptions of the available applications.

Use the stylus pen or your finger tip to select an application from the Job Menu.

20-2
20-3
20-4

Locator and Navigation Buttons
Operations of the Navigation buttons at the bottom of the screen are described in the table below:

20-5
20-6

System Status Icons

These are the standard status icons of the Android operating system. Your MaxiSys display tablet is a fully functional Android Pad. Refer to Android documentation for additional information.
By tapping on this area (bottom right corner), a Shortcuts Panel will be displayed, on which you are allowed to set various system settings of the tablet. Operations of each button on the panel are described in the table below:

20-7
20-8

App Switcher

1.The App Switcher can be enabled or disabled on Android System Settings. Short pressing this button opens a control panel.
2.Tapping a specific app shortcut button enables you to switch directly to the selected application screen.
3.Long pressing a specific app shortcut button displays the app menu, on which you can select and change the app shortcut.
Pressing and dragging the App Switcher around allows you to change the button position alongside the edge of the screen

4.Powering Down
All vehicle communications must be terminated before shutting down the MaxiSys display tablet. A warning message displays if you attempt to shut down while the VCI unit is communicating with the Car Scanner Tool. Forcing a shut down while communicating may lead to ECM problems on some vehicles. Exit the Diagnostics application before powering down.

5.To power down the MaxiSys tablet:
a)Press and hold the Lock/Power Button.
b) Tap OK; the tablet will turn off in a few seconds.

How to Install Ford IDS V108.01 Full without Activation

Latest Ford IDS V108.01 Full Software for Ford VCM II support online programming released on Jan. 2018.

Software Version: 108.01, no need activation

Operating system: Windows XP/Windows 7 32/64 bit

Multi-language:

5-0

Tested with all VCM2 SP177 series,  Ford VCM2 2-in-1 clone and VXDIAG VCX NANO Ford: Never failed!!

Online programming: Supported! but you should have an account yourself.

Ford IDS v108.01 function: Confirmed!

1.Able to download the very latest calibration files/software from Ford server if the network connection available at the time of connecting to vehicles

2.Read and decode fault codes

3.Delete fault codes

4.Display System current parameters in digital form

5.Combined displaying of data

6.Logs Keeping: write and keep of digital parameters in memory

7.Special functions: changing of permissible seeting of blocks, programming etc.

FAQ:

Q: Whether it can work with Ford VCM 1 Clone?

A: Yes, it can work with Ford VCM 1 clone

Q: Is this vmware or native

A: This is native, install on new and clean windows xp/7

How to install Ford IDS V108 step by step?

Preparation:

1. Please backup the important files on the desktop and disk C because the next operation will cover the content in the disk C.

2.Disable both local area and wireless network connection

3. If your computer hard drive only has one partition, please prepare a 16 GB U flash drive, if has 2 partitions, please unzip the software of CD into another partition except disk C

Step 1: Recover System
Open Software D (Disk D)

5-1
Create new folder Ford 108

5-2
Copy all zip file on Ford 108-2 software CD to Ford 108 folder
Eject Ford 108-2 DVD-ROM to DVD/CD-RW Drive

5-3
Copy all contents to Ford 108 folder again
Extract ford108.part01 zip files to Ford 108 folder

5-4
Then delete all other zip files, ford108.part01-ford108.part33
(only 3 files left)
Open Ghost 8.0

5-5
Recover system, choose destination D:/Ford 108/ford108.GHD
Restart computer and recover system

5-6

Step 2: Install Ford IDS 108 Setup

5-7

Run Ford Module Programming Limit as Administrator
Ford Extension Success, press OK
Module programming has been extended to 2018/05.26

5-8
Click on Start menu->All Program->Bosch->VCM Manager (Ford-VCM-II)
If system prompt PC software initialization error, press OK to ignore
Open Disk C/Progam Files/Ford Motor Company->IDS->Runtime->install3rdparty->
ETAS, Run setup as Administrator

5-9

5-10

Install Bosch VCI software Ford VCM II

5-11
click Next
Select Remove Bosch VIC software from your computer, click Next

5-12
Press Remove
Click Finish
Again run setup as Administrator
click Next

5-13
Ready to install the program
Click Finish

Install setup completed.

Step 3: Make Connection
Click Start menu->VCI Manger (Ford-VCM-II)

5-14
Connect VCMII with computer follow the diagram below

5-15
Open Computer->Manager->Device Manger->Network adapters->ETAS VCI USB RNDIS Device
to check connection is built

5-16

Open Network and Sharing center->Change adapter settings
Make sure you have disable both local area and wireless network connection

5-17

Step 4: Run software

Open Ford IDS v108 software on desktop

5-18

Network test, gathering vehicle data

5-19
check language options, programming modules and options

5-20

5-21

Done.

Review on 2016 Original Digimaster 3 Odometer Correction

Recently, I purchased a 2016 original Digimaster 3 odometer correction master, which gave me great help.

This is my story. In fact, several days ago, I have been in the trouble that I don’t know how to change the mileage for my lover,Fiat Punto 2003. What even worse is that I’m a quite lazy person and have little knowledge of programming. Therefore, I asked for help in the forum and hoped that someone can give me suggestions.

What a lucky man I was! A guy who was enthusiastic and patient recommended a odometer correction tool named Car Diagnostic Tools Digimaster 3. Followed his advice, I purchased the master on cardiagtool.co.uk with €1,200 and 4 days free delivery. It’s a package weighed 6.5kg including Digimaster 3 host, 12V switch power supply and varieties of adapters and cables,etc. You know what! This tool doesn’t need activate and the installation has been completed by the nice customer service.The after-sales service also provided all life long Free update every 2 month and solutions for any problem during the usage.

6

The using process is not going quite well.I entered with digiprog 189.000 as new mileage. but car shown only 18.900km.It was very strange. I opened my mileage calculator and I saw that there were 2 kinds of dashboards for this car. I tried both eeprom-codes to write manually. The first one calculated 189.000km, but still the car said 18.900 Then I tried the second one calculated 189.000km, and the car also said 189.000.

Luckily, all the problems are solved. My experience with Digimaster 3 from www.cnautotool.com is totally satisfied. I become more confident with my learning ability. I was told that D3 also have the function of audio decoding, immo test, ECU program, etc. I think I will try in the future.

GM MDI GDS2 GM MDI gds tech 2 win software HDD

GM MDI GDS2 GM MDI gds tech 2 win software HDD

5

GM MDI GDS2 software do not need activation. GM MDI GDS2 GM MDI Gds tech 2 win software Sata HDD for Vauxhall Opel/Buick and Chevrolet. GM MDI GDS2 GM MDI gds tech 2 win software work on win 7 system.

GM MDI GM MDI GDS2 GM MDI gds tech 2 win software Sata HDD for Vauxhall Opel/Buick and Chevrolet

Note: From 19th, August, 2015,www.worldobd2.com New GM MDI software HDD one HDD including both Vauxhall Opel/Buick and Chevrolet software, customers only need buy each of the hdd, then can use for Vauxhall Opel/Buick and Chevrolet.
Support vehicle list: Vauxhall Opel/Buick and Chevrolet
System: Win 7
Software Version: V14.0.02004
Update time: GM Global V2015.5.1
Used for: Both China GM MDI tech 3 without wifi and GM MDI scanner wifi version
Easy to use: Insert the GM MDI gds2 software HDD from obd2tuning.com to your computer, software can use directly with GM MDI scanner device, no need activation.
Auto key Programmer GM MDI scanner will provides full dealer level diagnostics and programming for all Vauxhall /Opel 16 pin vehicles from 1996 to present day. GM MDI on www.cnautotool.com Diagnosis software GM MDI gds2 software installed 2.5′ SATA HDD, Can Run on Win7 Operation System.
Using Notice:
– Please make sure your computer support win7 64 bits system.
– Computer system requirements: Year after 2005, 4GB RAM
– If computer failed to boot up , please enter BOIS system, change the SATA driver to AHCI.
Package including:
1pc x  500GB GM MDI 2.5″ SATA HDD (GM GDS2 Vauxhall Opel/Buick and
More Product information Please Search: WOBD2 (World OBD2 Auto Diagnostic Tool) www.worldobd2.com
Who Views This Also Viewed:

1.GM Scanner: GM MDI vs. VXDIAG GM vs. Tech 2
2.GM MDI replacement – VXDIAG VCX NANO GDS2 tech2Win
3.Review on VXDIAG VCX NANO for GM Opel GDS2 Tech2win
4.GDS2 2016.01 + Tech2Wiin V33.003 for GM OPEL Vehicles
5.What Can I Do To Chose GM Scanner