Kess V2 V5.017 Ksuite 2.47 Version Software Feedback

April 28, 2019 by wp-admin

Ksuite 2.47 software adds many working protocols comparing old version. Here’s the customer test feedback on KESS V2 EU clone version 2.47 K-suite.

For sale Ksuite 2.47 that works with kess FW 5.017
Added:
CATERPILLAR A5E2 P 549
VOLVO 1.6 /2.0 CONTINENTAL SID807 P 489
FORD TRUCK FPT ENGINE BOSCH EDC7UC31 KLINE P 548
HUSQVARNA KEIHIN CAN P 554
ALL SIMOS 18 18.1 18.2 NEW GENERATION 4.5MB
Some old protocol fixes
CHECKSUMS BUG FIXES

Note:
Ksuite 2.47 work only with kess v2 5.017. or Kess 5.028, not KTAG…software activation is for every computer and there is some new protocols.

Success:
VW Crafter Bosch EDC17CP20 Tricore External read-write OK!
c220 w204.. delphi CRD3…read write ok..
w212 220cdi CRD 2.16 read write obd ok..
VW Golf 5 EDC16U1 OK
Sharan EDC16U31 OK
Passat PCR2.1 Write OK (ECU was already unlocked)
Alfa 147 ME7.3.1 OK
Audi A6 4G 2012 EDC17cp44 Obd Write ok!
Edc17C46 writing on obd TESTED !
Renault scenic 1,5dci 2007 delphi ecu ddcr read/wirte ok!
Vag edc15 read/write ok!
Bmw ms42 read/wirte ok!
Bmw ms43 read/write ok!
Opel Astra H 1,7cdti 2008 81kw denso ecu Read/write ok
Bosch me 7.1 golf 4 2,8 24v AUE engine read/write ok!
Edc16c31 bmw read/write ok!
Edc16u34/31 vag read/write ok!
Delphi (mercedes sprinter om651) read / write by obd
Ford fiesta 2008 1.6 tdi edc1634 read write by odb
VW passat 1.9tdi PDI read/write by obd
Mercedes w211 om646 read/write by obd
new beetle tdi 105cv 1.9tdi 2004 edc15p read and write ok
pcr2.1 ok POLO TDI 6R 9CV READ OK WRITE PERFECT, full by obd2
bmw dde4.0 Read write ok!
Mercedes-Benz CLS 350 CDI BlueEFFICIENCY 4Matic 7AT with Bosch EDC17CP46 was readed with Kess v2 2.34 Tricore and written with Kess 2.47 Tricore
Porsche 997 3.8S Year 2006 Bosch ME7.8.x CARTRONIC WRITE PERFECT OK by k-line test in bench
BMW 320 E46 EDC16C31 OK
Ford Focus TDCI 1.6 EDC16C36 OK
Peugeot 307CC 1.6/PETROL ME 7.4.5 OK
Volvo EDC16C31 read-write on K-line…TESTED !
MED17.1 2.0 TFSI Audi A5 tested without problems (VR)
EDC16CP34 3.0 TDI without problem
EDC17C64 Skoda Octavia without problem (VR)
Mercedes Sprinter 906 2008 edc16c31 Read write obd OK!
BMW Bosch EDC16+C35 via CAN Read/Write OBD ok

Volvo S40 continental SID803A read/write ok
BMW E92 M3 2008 Continental MSS60 read and write over OBD work without a problem
Audi A4 Engine: CABB 118 kW (160 HP) 1.8 l Bosch MED17.5 read over OBD OK!
Audi A5 2008 Coupe EDC17CP04 CAPA 176 kW (240 HP) 3 l Read over OBD OK

Vag dq250 read / write no problem
VW Golf 6 GTD edc17c46 Tprot tricore Read and write without error CRC OK
VW Tigaun EDC17C64 GPT Tricore Read and write without error CRC OK
SEAT LION EDC17C64 GPT TICORE Read and write without error CRC OK

Mercedes B180 CDI 2010 EDC16C32 R/W OBD….OK !
Audi RS6 4F 5.0 TFSI V10 MED9.1 BUH
Read Master ECU OK -OBD
Write Master ECU OK – OBD
Write Slave ECU OK – OBD
When you write master ECU, fan are running, you need a good battery charger

test write edc17cp14 with tp 2011 write by obd use protocol 501 Work fine
Chevrolet Aveo 1.6 liter. 2012 year Delco E83. Read and write ok

test write edc17cp14 with tp 2011 write by obd use protocol 501 Work fine
Chevrolet Aveo 1.6 liter. 2012 year Delco E83. Read and write ok
Ford Mondeo 2.0L 2010 year Automatic transmission success
Toyota Corolla 1.6 automatic transmission success

Failed:

porsche 958 turbo 2011 SIEMENS SDI8 read is by Virtual read ,for ME impossible
write i have message CHANGE STATUT IMPOSSIBLE
NO SUCCES MAYBE ANTI TUNING

BMW E70 X5 Bosch EDC17CP09 Bootloader Tricore Protocol 226
Read OK
Write Not OK, problem with checksum correction

ksuite 2.47 can only write EDC17C74 protocol 510

Nissan Consult 3 Plus Data Monitor Recording Function

April 25, 2019 by wp-admin

This article show a guide on how to use Nissan Consult III Plus to perform data monitor recording function to record engine ECU data.Hope it is helpful to your work,and if you want to know more about Nissan Consult 3 Plus,check:Nissan Consult 3 Plus Projects.

Related Contents:
Nissan Consult 3 Plus Software Download
How to Install Nissan Consult 3 III Plus Diagnostic Software
Nissan Consult 3 Plus Clone Interface

Procedures:
1.Recording Data:
From the “All DTC” screen, select the system you need to monitor operational data from.
-In this example we will be looking at the Engine ECU.

2.From the “Self Diagnostic Result” screen, select the “Data Monitor”tab.

3.Selecting Data:
(i) Clear the pre selected Main Signals items by touching “Clear Monitor Item”.
(ii) Highlight the desired items from the list on the screen. Select these examples:

ENG SPEED
MAS A/F SE-B1
BATTERY VOLT
ACCEL SEN 1
T P SEN 1
START SIGNAL
INJ PULSE B1
IGN TIMING

4.Setting Recording Parameters:
In some cases, the default settings may be all that are required.(i) Touch the “Setting”tab (circled right).

(ii) Sampling Rate:Slow down the “Sampling Rate” from every 10ms to every 20ms.This can be done by selecting the drop down icon. (circled). (iii) Recording Time:There maybe cases where the recording time needs to be extended beyond the 10 sec. default.For this exercise, set the “Recording Time”to 20 seconds(arrow at right) so as not to make the graphs too large.

(iv) Trigger Point:Adjust the “Trigger Point” (arrow at right). Move it to 20% Preand 80% Post (circled).

5.Setting Trigger Conditions:

(i) Select the second tab “Trigger Condition 1”.This provides access to trigger condition settings.Un-select the “DTC Trigger”box if the ECM has a permanent DTC in it. Otherwise, the recording will start automatically as soon as a DTC is detected.

(ii) Select “Confirm” on the bottom right of the screen.

(iii) Touch “Start” once the screen returns to the“Monitor Menu” screen.

6.Data Recording outline:
The recording activityis basically as follows;(i) Touch record.(ii) Immediately start Engine & allow to idle for 2 seconds max.(iii) Race engine twice & allow to idle again until the end of recording.The above must be carried out as quickly as possible in order to maximise the recorded data on the graphs.

7.Start the Recording:

(i)Once prepared, touch “RECORD”on the bottom right of the screen to capture the activity of the engine as described above in step #6.Watch the recording time bar graph (circled at right). Recording stops at 100%.

NOTE:

DO NOT PRESS THE “Stop” BUTTON DURING THE RECORDING OR THE DATA WILL BE LOST.

(ii) Once the recording has stopped, the graph of data is automatically displayed.

Data can be viewed as required in either graphical or numerical form.

8.Saving the Recording:

The recorded file should now be saved so it is not accidently lost before it can be reviewed in detail.

(i)Select the “Save” button (circled) at the top left of the screen.

(ii) This opens the “Data Monitor” dialogue box. Enter the vehicle’s VIN as the “File name” to make the file easy to find later.

The file is now safely stored on the Toughbook in the CONSULT-III plus “Data Folders”.

(iii) Close the recording by selecting the red “X” Close button at the top right of the screen (circled at top right).

9.Accessing and Reviewing Recorded Data:

(i) Click on the “Recorded Data” icon at the top of the screen (circled).

(ii) Since this is a Data Monitor recording, select the “DataMonitor” folder.

(iii) Select and Open the previously saved file (JN1FBAC11A000…..).

10.Reviewing Data File:

The file can be displayed in graphical or numerical formats as required.

(i) In graphical display, one graph can be “dragged” from its current position in the screen order to be located alongside any other signal for a direct comparison.

(ii) If so desired, you can compress more data into the same field. Select the “+” or “-” symbol (circled).

(iii) It?s possible to slide the data back in time to catch activity well before “RECORD” was touched (represented by vertical red line near left of screen).

Use the bottom blue slider tab on the screen to do so (arrowed).

11.Sending Recorded Files to TechLine:

Once a recording has been saved, it can be readily accessed and attached to a TechLine Contact.

(i) Minimise CONSULT and click on the “CIII plus Data Folder” icon on the desktop.

These files are saved in a specific folder within the CONSULT application files:

C:\CONSULT-III_plus\UserData\DataControl\DataMonitor

(ii) Select the “DataControl” folder.

This is where all saved data of any kind is located.

(iii) Select the “Data Monitor” folder.

Since you were using Data Monitor, it is in this folder that your saved file will be stored.

(iv) Your recorded file identified by the VIN is found.

NOTE: Since this is a CONSULT embedded “DM” file, it cannot be opened outside of CONSULT-III plus.Simply attach this file to your TechLine contact.It is important that the VIN is used as the file name to enable easy identification and access in the future.If there is more than one file, it will help TechLine if they are identified by the same VIN with an alphabetical suffix, i.e.

JN1FBAC11A0001234_A
JN1FBAC11A0001234_B
JN1FBAC11A0001234_C … etc

Jaguar Land Rover DoIP VCI interface for SDD Pathfinder manual, update, how to us

April 22, 2019 by wp-admin

Jaguar Land Rover DoIP VCI interface is compatible with both SDD and Pathfinder engineering software covering models to 2017 year, therefore it is a good replacement of JLR VCI box / JLR DoIP VCI box. It features in online programming of SDD & Pathfinder, 2 years’ warranty. etc.

Here we go in details.

Outlook:

Firstly attach Jaguar Land Rover DoIP VCI package ( a high quality of gray head unit, a USB cable, a 16pin interface, a network cable).

Capabilities:

Support all of the SDD’s diagnostic & programming.
Support all of the Pathfinder’s diagnostic & programming.
Support Pathfinder activation service offline.
Support WIFI connection
Support VBF file edit
Support EXML file edit
Support online programming, coding & key programming

SDD software can update to the newest version in the assistance of manufactures’ engineer, and perform online programming.
Pathfinder can update to the newest version in the assistance of manufactures’ engineer, and perform online programming.
Engineer provides code activation service for free of charge

Coverage:
Work with all Jaguar & Land Rover models after 2005 year.
Work with the models after 2017, support Pathfinder software application
Work with the models before 2016, support SDD software.

* 14-16MY vehicle lines with Dolp VCI support:
* XE(X760)
* F-Pace(x761)
* F-Type(x152)
* XF(X260)
* XJ(X351)-16MY only
* Evoque(l538)
* Discovery Sport(L550)
* Range Rover(L405)
* Range Rover Sport (L494)

Pre-14MY and vehicles not detailed above will continue to use the current diagnostic system and VCls.

Replacement OBD cable is available.

DOlp VCI OBDII Replacement Cable P/N:1699200366879

How to Setup WIFI for Scania VCI-3 VCI3

April 20, 2019 by wp-admin

Introduction:

The Scania VCI3 truck diagnostic scanner can be connected to the computer with a USB cable or connect without wire. The VCI 3 is preset to run on a direct wireless connection.

scania-SDP3-VCI3-wifi
scania-SDP3-VCI3
NOTE:

Remember that the region of VCI3 is in default in Europe. If VCI3 will be used outside Europe, setting the region should be amended. For more information, see VCI3 configuration and user instructions, Configuring

VCI3, region and configuration:

For more information on the connection options and settings and how to use the functions in VCI3 and SDP3, see VCI3 Configuration and instructions user under the Help menu in Scania SDP3.

System Requirements:
Windows 7 O/S
NO CONNECTION WIRE
Connecting to wireless VCI3
Connect and disconnect the wireless connection VCI3 using the menu option
Connect the VCI wireless or Disconnect VCI wireless in Truck diagnostic Scanner SDP3.
When VCI3 module is connected to the vehicle or engine via the OBD connector, the VCI3 creates a network called VCI3_SN ecc_network.

How to enable Scania SDP3 VCI 3 WIFI wireless connection?

You can connect VCI3 interface with ytour computer using a USB cable or wireless connection.
Follow the instructions below. It can take 30-60 seconds to complete each step.

1. Connect your computer to VCI3 network through the Network icon in the field of status in Windows.
2. Start SDP3 software.
3. Select Connect to VCI wireless connection in the SDP3 menu.
4. Click the relevant VCI3 in VCI3s list wireless network and select Connect.
The first time SDP3 connects to a VCI 3, the drivers are VCI3 installed on your computer.

Launch X431 V 8 inch Cannot Select Car Always Loading Solution

April 18, 2019 by wp-admin

Problem:

I tried to select car brand from Launch X431 V 8inch Tablet scanner menu, but it did’t allow me and kept loading…

Solution:

Try to reset to factory setting and download App again.

How to Program Remote Key for LEXUS RX330 with SKP900

April 16, 2019 by wp-admin

Here is a tutorial on generating and programming remote key on Lexus EX330 with KD900 remote generator and SKP900 auto key programmer.

Device:

SKP900 Key Programmer

KD900 Remote Maker

Original key and new key

Vehicle model:

LEXUS RX330 or TOYOTA Harrier

Part 1: Generate Remote with KD900

Connect remote module with KD900

Select TOYOTA 314 FSK -> MAKE REMOTE

Make remote success, press ESC

Then choose “SIMULATE DEVICE”

Simulate device success, then put the remote module into key shell

Part 2: Program Remote with SKP 900

Select “TOYOTA” -> Remote

Choose “Remote system1” on SYSTEM SELECTION menu

Insert original key and Turn ignition on

SKP900 is communicating with vehicle…

Choose “Program Remote”

Then turn ignition on and open the drive door

In 5 seconds, press LOCK & UNLOCK button of Remote twice

Matching success!

Now test the remote

Test the power door

Done! SKP900 car key maker Program remote for Lexus RX330 success! The new programmed key is working now.

Program Hyundai i20 Smart Key with VVDI & Xtool X100 Pad2

April 11, 2019 by wp-admin

How-to: generate and program Hyundai i20 smart key with VVDI Mini Key Tool and XTOOL X100 PAD2.

Step 1: Generate remote with VVDI Mini Key Tool

Insert Xhorse universal smart key into detection coil

Select Vehicle Remote->Hyundai->Elite i20 C7000 ID46 433 15+ 3BTn 2432

Press Generate

Generating remote in progress

Generate remote succeed

Step 2: Program smart key with xtool x100 pad2

Connect X100 pad 2 with vehicle via OBD socket

Select Hyundai->Security Code->47 Authorization code (smart card)

Enable network connection before reading security code

Turn on ignition switch

Read security code success

Select Program Immobilizer/remote->Smart key system->China-> Type 5 (without card slot)

Press Start button to continue

Select Program smart keys

Xtool X100 pad 2 will ask to enter security code to access

Put the original key close to the Start button

Program success. Press YES to program next key

Put the smart key to be programmed close to the Start button

Program smart key success

Test remote control and start car.

Done.

Autel Maxisys Elite Professional Automotive Diagnostic Scanner Review 2019

April 9, 2019 by wp-admin

Are you a professional car mechanic, a trained car technician, or a car enthusiast? Well, here’s
Autel Maxisys Elite – an amazing tool for you that can make your day-to-day job much easier and hassle-free.

Autel Maxisys Elite Overview

For your reference, here’s a brief introduction of an innovative and advanced automotive scanner i.e. Autel Maxisys Elite. Designed by an industry-leading brand, it features to be a fully functional OBD2 vehicle scanner.

This Autel Maxisys Elite offers an extensive range of features and functionalities so that you can easily and quickly fix all car-related problems.

For example, it lets you perform advanced ECU coding. Furthermore, it allows you to smoothly perform all of the workshop operations.

Starting from keeping vehicle records and data files to storing customer information, the device will help you organize all the details

In addition to this, it is one of the most reliable tools that are currently available on the market. Not only it confers a slew of advanced features, but also it will be a one-stop solution for all your needs.

Autel Maxisys Elite Detailed Review
Compatibility and Vehicle Coverage

This diagnostic scanner code reader offers an extensive vehicle coverage. It is compatible with more than eighty US, European, and Asian makes and models.
Fast and Smart

The device is equipped with the latest 1.8GHz Quad-Core Processor. As a result, it offers you a lightning fast operation speed with a quick diagnosis.

The best part is — the bootup time of this device is less than 20 seconds. Thus, the product can truly give you a wonderful diagnostic experience.

This smart car diagnostic tool also comes with a bunch of excellent functions. The list of this advanced functions includes One-Click Upgrade, automatically read VIN, and access to Autel Cloud Technology.

Mobility and Ease of Use

This diagnostic scanner has an exceptional OE-Level functionality. It works perfectly on most OBD1 and OBD2 protocols.

Advanced Functionalities

This diagnostic scanner will help complete ECU programming on various BMW and Benz vehicle models.

Additionally, it offers you “Coding function” so that you can perform coding and programming on the complex control modules of a vehicle.

Other notable functionalities of this gadget include anti-theft matching, SAS reset, tire pressure reset, injector programming, DPF reset, and throttle matching etc.
Online Programming

With this powerful tool, you have the provision of performing online ECU programming.

This feature is undoubtedly considered to be one of the most valuable and worthy functions.

Online Programming feature certainly helps professional DIYers and mechanics to troubleshoot and deal with complex vehicle problems.

All you’ll need to carefully follow step-by-step instructions to solve the issues.

Hardware Configuration

The model is powered by the world’s fastest and most efficient mobile processor i.e. NVIDIA’s Tegra” 4.

Also, it comes with a visually stunning, sharp, and bright Retina display of 9.7-inches. This diagnostic scanner is bound to work as fast and effective as possible.

MaxiFix Platform

By purchasing this device, you will have access to the MaxiFix Platform.

The platform allows you to collaborate with other professional technicians. Additionally, it gives you access to a comprehensive database diagnostic tips, troubleshooting tricks, repairing procedures, and more.

Automatic Software Update

This automotive OBD2 scanner will receive automatic software updates, along with real-time push message notifications. This process will periodically upgrade your device and make it up-to-date and compliant.

Ergonomic Design

The model features an ergonomic design. It comes with rubberized outer protection for maximum longevity. Also, it has a superior rugged internal housing.

Who Is Autel Maxisys Elite Built For?

The recommended users of this Autel Maxisys Elite scanner include auto mechanics, auto technicians, car DIY’ers, car enthusiasts, and car owners etc.

Like a mechanic or technician, the device will make your job much easier to accomplish. It will let you analyze and resolve intermediate-to-complicated car-related issues so efficiently.

Other than that, car DIY’ers, car enthusiasts, and car owners can use this product as they often deal with a fleet of vehicles

The Bottom Line

The aforementioned detailed review and the list of nine important features prove that why Autel Maxisys Elite is worth your investment.

So, are you looking for a professional-grade automotive scanner with advanced functionalities? If yes, then there can’t be an any better option than this device. Featuring fast, efficient, and reliable performance, the device will let you resolve all car-related issues without any hassles.

Get Autel MaxiSys Elite Now for 4 Reasons

April 7, 2019 by wp-admin

Get Autel MaxiSys Elite Now for 4 Reasons:

1. FAST: Autel Maxisys Elite is equipped with the NVIDIA Tegra”4 Quad-Core Processor 1.8HGz that provides you with a fast operation speed and a quick diagnosis, the boot up time is within 20 seconds, all these give you a wonderful diagnostic experience
2. SMART: This diagnostic tool has some excellent functions such as automatically read VIN and One-Click Upgrade, Autel Cloud Technology (MaxiFix Platform, Data Management, Data Feedback) gives you support anytime, anywhere
3. MOBILE: This diagnostic scanner is with exceptional OE-Level functionality that works on most OBD1/OBD2 protocols, the enhanced wireless connectivity between the tablet and VCI device allows greater mobility and ease at work
4. POWERFUL: This diagnostic scanner can complete online ECU programming on Benz and BMW vehicles, ALL system diagnoses, and other various advanced functions and common functions

Advanced functions:

*   ECU matching on Ford enables you match the new ECU with your vehicle after replacing the old one
*   Coding function helps you do programming and coding on some specified control modules
*   Leading function for VW&Audi offers you a step-by-step guidance as how to fix the problem when you diagnosed the problem of the vehicle
*   Anti-theft matching can disable the lost key and add the new key’s information to program to ensure the security of your vehicle
*   SAS reset will calibrate the steering angle sensor after the replacement to make sure the ECU issued the correct steering instructions and memorize the max angle’s position
*   Tire pressure reset is to make up or replace the tire, tell the ECU that the tire pressure returned to normal and keep all the information in record
*   Injector programming will write the new code to the ECU after replacement of injector, so that the injector works
*   DPF reset is to retrieve/erase DPF-related codes, reset the DPF light after the filter has been replaced
*   Throttle matching is to do ECU matching after throttle cleaning or replacement…

Online Programming
This diagnostic tool is able to process online ECU programming on Benz and BMW vehicles, which is the most advanced and valuable function for many mechanics and professional DIYers. Just do it as instructed, you will find it is easy to fix the complex problem with the guidance

Hardware Configuration
Powered by NVIDIA’s Tegra”4(the world’s fastest mobile processor), equipped with visually stunning 9.7” Retina display (2048×1536 dpi), designed with Android system, this diagnostic tool is bound to work fast and effectively. It also supports MaxiVideo and MaxiScope connection

MaxiFix Platform
The MaxiFix Platform enables you to network with other professional technicians and access a huge database of repair, diagnostic tips and procedures, you can have data feedback and management through this platform and get many repair work done

Original Autel MS908P Customer Feedback

April 5, 2019 by wp-admin

(Tested) Original Autel MS908P Customer Feedback

I’m a Master Technician and shop owner for over 3 years specialized in BMW、AUDI、FORD etc. I tried many products and found some good ones and some are extremely terrible. What I want to mention is some good products of Autel. Now, I want to share my experience about MS908P.
Pros:
1、Coverage-With wide compatibility, it covers my BMW、AUDI、FORD. I do not need to buy other OBD products and it can easily to identify car’s VIN in a very short time.
2、Program- Compared other ones, it has comprehensive OE-Level diagnostic functions (program), which included DIY my personal settings in cars. My customers are like this. Besides, uniquely integrated vehicle programming capabilities working with a SAE J2534-1 & -2 compliant vehicle programming pass-thru interface, especially online programming function in BMW supported.
3、Highly sensitive LED touchscreen- With fast A9 qua- core processor, a32GB solid state hard drive and a short diagnostic time, I can handle multiple tasks easily and intuitively.
4、Full OBD II functions-Except read and clear codes and other basic functions, it has advanced vehicle diagnostics and analysis, live data, actuation tests, adaptations and ECU information. I think I can handle the daily problems with it.
Tip:
To be honest, this products is little expensive for individual, you can choose a cheaper one for your daily diagnose. It may more suitable for the professional technician and definitely worthy.

wholesaleobd2.net

China auto diagnostic tool center–About OBD2 Things:such as Launch X431,Autel tools,Autoboss

Monthly Archives: April 2019