How to Read ISN DME for CAS EWS3 EWS4 System with BMW E/F Scanner?

BMW E/F Scanner II Full Version Feature:

1.Basic features modul

2.E-series Coding module

3.E-series CAS1, CAS2, CAS3, CAS3+  mileage Reset

4.E-series keyprog module

5.FEM/BDC mileage module

6.F-series mileage correction module

7.FLASH calibration READ/WRITE calibrations for F and G series models

8.ISN reset for F-series HP8 gearbox

9.FEM/BDC keyprog module

10.ISN MSx8x (SIEMENS) for BMW

11.F-Coding module

12.Tricore module for BMW

13.CAS4 CAS4+ F-series keyprog module with F-ISN

 

BMW E/F Scanner (BMW-Explorer) software program has the function of reading the  ISN synchronization code via the OBD-II in the computer with a DME / DDE engine from Siemens and Bosch.

 

Applied model:

CAS: all versions of CAS1 CAS2 CAS3 CAS3+

EWS3 system

EWS4 system

 

 

Reading ISN DME (CAS System)

Go to the CAS control unit, “Additional functions”, “Reading ISN”

In the opened window ISN will be displayed.

If the machine is equipped with the EWS3 system where 2 bytes of the constant part and the change are used, it will be displayed in the window 2 bytes of ISN DME (the upper 3 windows will be empty), if necessary they can be changed.

If the machine uses the EWS4 system, then 16 bytes of constant synchronization are used and there is no variable part.

Also after 2006, CAS3 uses an anti-theft code for EGS

If there is an EWS3 system in the car, then this code is the same with the engine control unit, if the machine already has an EWS4 system, then EGS uses separate 2 bytes

The program is in place of the engine ISN, it will display the gearbox code .. as in the picture below

1

 

Reading ISN DME (EWS3 System)

Come into ECU the DME/DDE engine, choose “Additional. Functions” and “ISN”

In the engine control units, the program supports reading the anti-theft ISN code via the OBD connector

To do this, open the control block identification window further in the additional reading functions ISN

2

 

Reading ISN DME (EWS4 System)

Come into ECU the DME/DDE engine, choose “Additional. Functions” and “ISN”

In the engine control units, the program supports reading the anti-theft ISN code via the BMW Explorer OBD connector

To do this, open the control block identification window further in the additional reading functions ISN

3

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>