Best auto scan tool for Nissan Consult-3 Plus

If you have a nissan vehicles,  It is better for you have a nissan consult III kit,  you can use it test you vehicle usually, Consult-3 Plus for Nissan can support all the models of the Nissan and Infiniti from 1996 up till now.  so you don’t need to worry that it can not suitable for your vehicles.

It support Multi-Languages: English, Portuguese (Newly Add), French, German, Spanish, Italian, Japanese, Russian, Finnish, Greek, Chinese.  so No matter where you come from, you can use this tool in your familiar language, easy to operate it

This nissan diagnostic tool support computer system : Windows XP, WIN7, WIN8 & WIN10

Conslu-3 for Nissan Functions:

1. Scantool Diagnostics:for all Nissan,Infiniti,GTR

2. Immobi and Smart key:for all Nissan,Infiniti,GTR

3. Nissan GTR: for Nissan GTR Diagbostics and Immobi

4. Electromobiles car:for Nissan Electromobiles car Diagbostics and Immobi

VXDIAG Full VW ODIS “Trail has expired” Solution

Problem:

I have got the VW ODIS license activated to work with the VXDIAG Full VCX Plus scanner. When i tried to launch ODIS software, it gave me error “Trail has expired.

Sorry, but your trail period has expired.
The expiration data is 01/04/2019.
Please, register this software to remove trail limitations! ”

vxdiag-vw-odis-expire

OBD2TOOL solution:

Change your computer date/time to 01/01/2019 (dd/mm/yyyy)

Problem will be solved.

VXDIAG Benz failed to Auto Connect to Mercedes Solution

Question:

I tried to connect VXDIAG Full Brands scanner with a 2005 Mercedes Benz E320  with Vin# WDBUF65J15A706074.  It cannot connect automatically. Device is good, software not problem. Should I choose vehicle model manually?

vxdiag-fail-auto-connect-1 vxdiag-fail-auto-connect-2 vxdiag-fail-auto-connect-3 vxdiag-fail-auto-connect-4
OBD2TOOL solution:

VXDIAG vcx plus multi tool does not always connect automatically, you have to choose the vehicle manually.

VXDIAG Toyota Techstream Ask for Activation Key Solution

Q: When I install TOYOTA Techstream V14.00.18 software for VXDIAG multi tool, it ask for the registration key? Where can i get the key?

I have installed the VX manger and Toyota driver on Windows 7 laptop.

I did run Techstream software from patch as i was told.

vxdiag-techstream-v14-activation-1 vxdiag-techstream-v14-activation-2 vxdiag-techstream-v14-activation-3 vxdiag-techstream-v14-activation-4

OBD2TOOL Solution

The solution works on all VXDIAG scanners, VXDIAG VCX NANO, VCX Pro and VCX PLUS series.

1). To use Techstream V14 or above software, you must start/run software from the patch.  Then it will not ask for the registration code.

2) If you did run software from patch and it still requires the activation key, there maybe something wrong with your computer operating system.  Try to uninstall O/S and install techstream software again.

Free Download VXDIAG Toyota Techstream V14.00.018

https://mega.nz/#F!SAR3Qa7B!N61Ikd1HKEodTiwpODLXKQ

Free Download VXDIAG Techstream patch

https://mega.nz/#F!7VZzBQgZ!wO9Fjk0gfZF-tfv6zQAqzw

How to Register VXDIAG Full VW ODIS Software (2TB HDD)

Q: I have got the VXDIAG Full brands with 2TB software HDD. How can I register the ODIS 5.1.3 software?

A:
VXDIAG full ODIS software is well installed in 2TB HDD.  But require to register (each brands) and change language before using.  Follow steps below to register VXDIAG ODIS:

After insert 2TB HDD and choose ODIS software,  main software for various models will be displayed on desktop.

vxdiag-vag-odis-1
Install the diagnostic data packages of each vehicle type separately. It takes about 3 to 4 hours.
The software is default system language.

I.. register ODIS for Audi

vxdiag-vag-odis-3

Select PostSetup language
vxdiag-vag-odis-2
Downloading ODIS data
vxdiag-vag-odis-3
Register ODIS Audi software succeed
vxdiag-vag-odis-5
vxdiag-vag-odis-6
Register other software one by one until succeed.
Software is ready to use.
vxdiag-vag-odis-7
vxdiag-vag-odis-8
Note:
If you use VXDIAG VCX NANO 5054 for vw interface, you need to install software as well.  The current version ODIS 5.1.3 shares the same installation steps as 4.4.10.

Free Download Porsche PIWIS III 38.250.000 for VXDIAG Porsche DoIP

The  VCX-DoIP Piws 3 is only Vxdiag J2534 tool supports Porsche PIWS 3 Software till now. The VXDIAG PIWIS3 software has released to newer version V38.250.000.
Free download VXDIAG Porsche PIWIS 3 software latest version 38.250.000:

https://mega.nz/#F!GZ401QjJ!mVbAaQM0e_7t1Ok1HOpXZA

porsche-piwis-3-mega-download

Date: 02-04-2018
Version: 38.250.000
Password: No
Image: piwis 38.250.000
Multi-language
porsche-piwis-3-v37-success
porsche-piwis-3-v37-success porsche-piwis-3-v38-download-1   1
porsche-piwis-3-v38-download-2
porsche-piwis-3-v38-download-3
porsche-piwis-3-v38-download-4
VXDIAG Porsche PIWIS III is good at maintenance, repair, control units change and programming & setting codes
New Piws 3 operation system and more intuitive diagnostic interface as Piwis III
VCX-DoIP Piws 3 Interface For Porsche post-2017 vehicles with DoIP diagnosis
VCX-DoIP J2534 Piws 3 VCI look for maintenance wiring diagram
VCX-DoIP Piws 3 login for online immobilizer programming
VCX-DoIP j2534 Piws 3 PST3 Interface support special functions like modification or flashing, with Engineering mode (Development version)
Developer mode enabled
Worked with new and old Porsche vehicles!
New & Old Cars:
All Porsche from 1998-2018:
Porsche 911(997) (991)
Boxster/Cayman (987)
Cayenne up to MY 2010
Cayenne from MY 2011
Panamera
Especially the latest models:
Paramera (971) 2018
Caynenne (92A) 2018
Macan (95B) 2018
911 (991) 2018
and other old models
www.obd2tool.com

John Deere Service Advisor Search Engine Error sloved !

This is for anyone when he/she runs the John Deere Service Advisor heavy duty diagnostic software, the system appears error message that the search engine module can not be loaded and then the program ends.

NOTE THAT YOU ARE TRYING ANY TRICK ON YOUR OWN RISK.

Optional solutions:

Solution 1:
Run as system administrator, roll back pc date reactivate using activator Then roll date back to normal date if error still renew once again. Been working for me so far.

Note that, don’t know how long it stay working but works im sure someone will have solution for it soon.

Also advice if doing fresh install roll back the date on pc do the install after then install and activations have been done.
Go to task manager look for the Heavy Duty Scanner service adviser on have it start its tasks in 2030 :save and then reset your pc date should be good for while

Solution 2:
if you set a date before the lightweightidol license expired, start the lightweightidol service, set the real date and start Advisor, it works.

Solution 3:
start advisor. when error comes with “search engine” Close John Deere SA. afterwards set your PC date to feburary 2015. start SA again (run as administrator). it now comes with error on licence. close SA Again. set pc date back to normal. run SA Again. now it Works.

Solution 4:
The search engine error can be solved.
Set back the date, before the expiry date found in John Deere Service Advisor\SUIR\license.log (august 14 in my case). Start LightweightIDOL service. Set the real date, and Advisor working again.
I made a batch file to simplify it. To make it work Control Panel/Regional/short date format have to be yyyy-mm-dd or you have to modify batch. Maybe you have to modify ServiceADVISOR.exe path too in the batch. Have to run as administrator.

Sa.rar

Solution 5:

I have had the same error with ssearch engine connection in JD SA.
reinstalled it twice, changed system date back and forward, run activator. No result for me.

But actually I found the solution for this issue.
Just need to install july update from the post http://mhhauto.com/Thread-John-Deere-Ser…#pid758969
And the error disappeared.

newer data discs (2016/02)

Solution 6:

back date to 08.10.16
install JD SA, restart, activate, mount latest disk you have (05.2016) and install update, for finish get license error, ignore and close, set actualy date, run JD SA -> works fine, install july update

testing today on 3 laptops (Windows 7 and 10)

On a side note: procedure about turning off the updates

don’t know how long it stay working but works im sure someone will have solution for it soon.

Also advice if doing fresh install roll back the date on pc do the install after then install and activations have been done.
goto task manager look for the service adviser on have it start its tasks in 2030 :save and then reset your pc date should be good for while Smile (SO TURN IT OFF IN TASKMANAGER SO IT STARTS 20 30 YEARS FROM NOW!!)

Fresh new installations also work but can be much more complicated sure a patch would be much easier. But it can be done with out a patch so far

In taskmanager I don’t stop any service just put service advisor updater to 2030 to start

also makes sure eculp.ini configurator reads like this

A valid ECULP License has been found

Licenses for the following modes have been found:
TestCell Programming
FinalEOL Programming
Service Programming
ECUCPP Programming Tool

All JD Components were found and properly licensed

JDEcu : Version 1.0 : 01-apr-2021
JDConfig : Version 1.0 : 01-apr-2021
JDData : Version 1.0 : 01-apr-2021
JDIntelHex : Version 1.0 : 01-apr-2021
JDPayloadReader : Version 1.0 : 01-apr-2021
JDPayloadProcessor : Version 1.0 : 01-apr-2021
ECULoaderProgram : Version 1.0 : 01-apr-2021
ECULP_TestCell : Version 1.0 : 01-apr-2021
ECULP_FinalEOL : Version 1.0 : 01-apr-2021
ECULP_Service : Version 1.0 : 01-apr-2021
ECULP_TestCell_OEM : Version 1.0 : 01-apr-2021
ECULP_FinalEOL_OEM : Version 1.0 : 01-apr-2021
ECULP_Service_OEM : Version 1.0 : 01-apr-2021
ECULP_ECUCPP : Version 1.0 : 01-apr-2021
ECULP_Direct_EOL_Output : Version 1.0 : 01-apr-2021
ECULP_OEM_DISTRIBUTOR : Version 1.0 : 01-apr-2021
Service_ADVISOR_Ag : Version 1.0 : 01-apr-2021
Service_ADVISOR_CF : Version 1.0 : 01-apr-2021

The last – if all tips/solutions above don’t work for you,

John Deere Service Advisor 4.0 Crack – No Search Engine Error

Lonsdor K518ISE Adds Skoda Rapid Spaceback 2017 MQB Key Success

Report:

Skoda Rapid Spaceback 2017 Add key success with Lonsdor K518ISE Key Programmer

Under Subscribed menu

Select Immobilizer->VW->IMMO4->Select IMMO manually->MQB-35XX (Continental/VDO)->Immobilizer

Photo attached:

Skoda-Rapid-Spaceback-2017-Add-key-success-lonsdor-k518-1 Skoda-Rapid-Spaceback-2017-Add-key-success-lonsdor-k518-2 Skoda-Rapid-Spaceback-2017-Add-key-success-lonsdor-k518-3

Lonsdor K518ISE Program Opel Vivaro 2013 Key Success

New test report from K518ISE user: Opel Vivaro 2013 program spare key success.

Photo procedure attached:

Enter from Renault menu, no pin code required. Very easy and fast.

Select Immobilizer->Renault-> Select from vehicle-> Vivaro->Add key

lonsdor-k518-Opel-vivaro-2013-key-1 lonsdor-k518-Opel-vivaro-2013-key-2 lonsdor-k518-Opel-vivaro-2013-key-3 lonsdor-k518-Opel-vivaro-2013-key-4
lonsdor-k518-Opel-vivaro-2013-key-5 lonsdor-k518-Opel-vivaro-2013-key-6 lonsdor-k518-Opel-vivaro-2013-key-7 lonsdor-k518-Opel-vivaro-2013-key-8 lonsdor-k518-Opel-vivaro-2013-key-9
Add 2 spare keys successfully.

Lonsdor K518 Updated Renault Clio 4 All Keys Lost Offline

Lonsdor K518ISE/K518S adds Renault Clio IV all keys lost offline on July 5th, 2019.

lonsdor-renault-clio-4 lonsdor-renault-clio-4-1 lonsdor-renault-clio-4-2 lonsdor-renault-clio-4-3