Year: 2020

How-to-use-GM-Tech2-to-program-Chevrolet-program-key-1

How to use GM Tech 2 to program Chevrolet program key

GM Tech2 is good tool for diagnosis and programming,and it can do key programming function only for GM cars,here we will display the steps about programming Chevrolet program key fob.For gm key programming,no need tis2000 usb key software. How to use GM Tech 2 to program Chevrolet program key 1.Power On

Fix-2005-C6-Corvette-Brake-lights-stay-on-with-VXDIAG-VCX-Nano-Tech-II-5 (2)

Fix 2005 C6 Corvette Brake lights stay on with VXDIAG VCX Nano / Tech II

Car model and year: 2005 C6 Corvette z51 53,000 miles. 6speed manual. Symptom: Found out the hard way about the drain while not driving the car for a while. Battery would not recharge, so I purchased a new one about 8 months ago. Found out the hard way the interior

How to Install Mercedes Benz DTS Monaco 8.16 Software

This instruction show you the guide on how to install Mercedes Benz DTS Monaco Software. Preparations: Benz DTS Monaco Software Free Download After finish downoading and extract you will get below files Double click DTS-Setup to start installation Then just click default option to continue Click Finish Copy files in

Solve-Porsche-958-Cayenne-Exterior-Lighting-Issue-with-PIWIS-III-2-2

Solve Porsche 958 Cayenne Exterior Lighting Issue with PIWIS III

Car model: Porsche 958 Cayenne Issue: Standing outside vehicle with car off I press lock on the fob and everything happens as I expect: lights flash and turn off… Chirp chirp… Car locks… AntiTheft light starts blinking… Same results when locking manually. But exactly 20 seconds later something unexpected occurs.

nexiq-wiring

How to set up John Deere SA to work with Nexiq clone

Electronic Data Link (EDL) is the dealer diagnostic PC-to-vehicle interface compatible with Service ADVISOR software. With Service ADVISOR you can view service manuals, use DTAC (Technical Assistance Center) data, make diagnostics, readings, tests and calibrations, re-program controllers Topic 1:  John deere SA possible with NEXIQ USB Link? It is possible to

Obdstar-X300-DP-plus-table-adds-a-key-on-Dacia-2018-Transponder-Chip-4A-1

Obdstar X300 DP plus table adds a spare key on Dacia 2018 Transponder Chip 4A

Add a Spare Key on Dacia 2018 Transponder Chip 4A: X300DP Plus Done! Steps: Connect X300 DP plus with vehicle Select immobilizer→ DACIA→ DACIA V30.73→ Program keys→ Duster→ 2014-2018→ Program keys This function is available by connecting the server For the keys to be learned, If there is a new key,

Nissan-Consult-3-Plus-Reprogramming-ECU-TCM-Guide-11

Nissan Consult 3 Plus Reprogramming ECU TCM Guide

This article show a guide on how to use Nissan Consult III Plus to reprogram Engine Control Module(ECM) or Transmission Control Module (TCM). Note:A symptom based TSB isrequired before using this procedure.This procedure does not apply to Nissan LEAF™. IMPORTANT: Before starting, make sure: ASIST on the CONSULT PC has been

oem-clone-xentry-vci-clone-feedback-01 (2)

How to use Benz VCI C6 Mercedes Diagnostic Tool

This article is on how to use Benz VCI C6 Mercedes diagnostic tool. Simple guide: Benz VCI C6 software is frozen by the factory and needs to be activated using teamviewer after receiving the package . After that, plug VCI C6 to the computer and the car, open the software

obdstar-x300-pro4-programs-hyundai-i40-remote-16-2

OBDSTAR X300 PRO4 programs Hyundai i40 remote successfully

Have 2013 Hyundai i40, the key starts the car, put the buttons don’t work, so I’m going to use the OBDSTAR X300 Pro4 to program the key. Put into the OBD port. Select from vehicle. Europe. i40 is here. I can “Select from type”, then “Remote”. 16pin obdii connector. Type 1.

DTS-settings-01 (2)

VXDIAG C6 – DoIP Fix for DTS Monaco enet cable DTS

I have seen a few people struggling with DoIP and VXDIAG C6. Please see the attached image of the interface settings for DoIP. When using DoIP with Vxdiag make sure you uncheck/turn off the CAN interface(MODULE_TYPE_ID_MTS6532) in DTS. Then connect the interface to the car and laptop, open vxmanager and