Month: October 2020

gm-tech2-1

CM Tech2 Review: TIS2000 Installation Solutions

I bought a GM Tech 2 which can diagnose vehicle by myself. I had been confused by various car problems in a long time, because I could not figure out them myself sometimes and tired of service departments not knowing what’s going on. Sometimes I feel that I’m actually even smarter

Nexiq USB 2 VS DPA5 vs VOCOM II for Volvo

I just got confused to buy diagnostic interface for Volvo (software PTT 2.6 or later). Nexiq and DPA both work for multi brand but not sure how it perform with PTT 2.6. VOCOM II only work with PTT but it is expensive too. I do parameter programming, ECU programming and

gm-tech2-gm-mdi-mdi2

GM scan tool Tech 2 or MDI or MDI 2 GDS1 or GDS2

Here’s an info about the General Motors scan tools, including discussion of the Tech 2, MDI and current GDS 2GDS 2. It looks like the trend is toward subscription services and frequent payment for updates. TECH 2 handheld scan tool or MDI-2 GDS2 PC-based system? From 1992 to 2009 and certain

Digimaster3-No-Memory-Solution-1

How To Fix Digimaster 3 Insufficient Memory or File Copy Error

If your Yanhua Digimaster III meet error like this  below: Error: Cannot copy “LCB_ALFA_147.htm”. There is not enough free disk space. Solution: 1. Turn off DigimasterIII and turn on again, when you enter Digimaster 3 system, there will be a notice asking to download a management program or black screen.

BMW E85 Z4 SBSR Airbag Module Coding Guide

I’ve finally got a used airbag ECU for my 2003 Z4 3.0 and after fitting it the airbag light is still on. A pal used a obd2 scanner to read the fault code and the “Safety and Gateway module” shows the error “93AB Incorrect chassis number. He can clear the

disable Benz tire pressure monitor light on with STAR-08

How to disable Benz tire pressure monitor light on with STAR SDS

if you ever took your car to the shop to disable that annoying tire pressure monitor light on the dash and they told you they couldn’t show them the steps. 1. Connect Xentry to the car ignition on. 2. System Diagnosis (Control Modules > Body > system diagnosis) 3. Control unit

Jaguar-SRS-module-setup-with-the-Autel-Elite-1

Jaguar SRS module setup with the Autel Elite

Screen-by-screen the navigation on the Autel Elite to setup a new Restraints Control Module (RCM) on a 2009 Jaguar XF. The module records and stores impact data and must be replaced after three records are noted. OE repair procedure confirms the module does not require J2534 programming. However, it needs

How-to-program-GM-Corvette-F45-BCM-with-GM-TECH2

How to program GM Corvette F45 BCM with GM TECH2

To program out GM Corvette F45 BCM, you still would need a GM Tech 2 Scan Tool. Guide: Step 1. Hook up your Tech 2 (Driver’s footwell) Step 2: Startup TECH2 Step 3: Enter Diagnostics menu Step4: Enter year of car Step5: Enter Passenger Car menu Step 6: Select Body

Peugeot-4008-Air-Conditioning-Actuator-Programming-by-Launch-X431-1

Peugeot 4008 Air Conditioning Actuator Programming by Launch X431

This instruction show you guide on how to use Launch X431 to program air conditioning system actuator for Peugeot 4008 2006.And for more Peugeot projects,please check here:Peugeot Trouble Repair. What You Need? Launch X431 PAD III Operations Procedures: 1) Use X431-PADIII,choose Peugeot->Auto search,choose “Yes” 2) Choose Fast test, begin to scan