FVDI Program Renault Megane 3 2009 PCF7947 Key Card by OBD

Test report: successfully added a 3-button key card to a Renault Megane III year 2009 using FVDI2 full abrites commander.

fvdi-renault-megane-3-2009-1

Original key card:

fvdi-renault-megane-3-2009-2

New key to be programmed

Step 1: Read Pin Code

Open FVDI software, Select Renault Software->V5.2

fvdi-renault-megane-3-2009-3

Choose Key Learning function-> model Megane III X95 2009+

fvdi-renault-megane-3-2009-4

fvdi-renault-megane-3-2009-5

Press Start in menu to read key information

fvdi-renault-megane-3-2009-6

Then Read PIN Code

This is a Megane III, put the key card in ignition lock without starting engine

fvdi-renault-megane-3-2009-7

Read Pin Code success

Step 2: Learn key with FVDI Renault

Press Learn function

Enter number of keys to be programmed: 2

fvdi-renault-megane-3-2009-8

Press OK to continue

fvdi-renault-megane-3-2009-9

Insert key 1 into ignition lock and switch ignition to ON position

fvdi-renault-megane-3-2009-10

Then insert key 1 and turn ignition to ON position

Key learning in process

fvdi-renault-megane-3-2009-9

Press OK to save key learning result.

fvdi-renault-megane-3-2009-10

Turn ignition OFF and then ON

fvdi-renault-megane-3-2009-11

Key learning success

fvdi-renault-megane-3-2009-11

Test both keys. Both keys can start car.

FVDI not work or driver won`t install, please check computer Config

FVDI 2016 not work or driver won`t install, please check computer Config

FVDI 2016 not work or driver won`t install? Then some user consider FVDI hardware is broken and send back to the seller for repair. Actually, www.obd2tool.com engineer tested and proved it’s not problem of hardware, but the compatibility of the computer and FVDI.

FVDI Commander 2016 computer configuration and operation system (OS)

1.CPU >=1.8 GHz , more than 2GB
2.OS: Windows XP, tested windows 7 32bit and prompt many system patches not found.
3.When update, if it prompts “Connecting to server…….failed” (See picture one).
Maybe the network connection is unstable, as the picture 2 shows, this user tried fine network connection when update, then get message “Connecting to server…….OK” and able to download firmware.

Real user’s Case to prove my opinion:
One user’s  FVDI 2016 not work, then contact our engineer to remote assist him, and find his computer is only with 768MB memory, use another higher configuration computer to install FVDI, finally FVDI 2015 works.
20-3

How to use 2015 FVDI software USB dongle


2016 FVDI commander comes with software USB dongle. Software USB dongle is capable of carrying out online function including:
1. AUDI A6/Q7 key learning
2. AUDI A6/Q7 VIN writing
3. AUDI A4/A5/A6/A8/Q5/Q7 component protection
4. AUDI A8, VW Touareg KESSY adaptation
5. VW MED17 EEPROM reading
6. BMW CAS3, encrypted CAS3+ key learning
7. BMW CAS3, encrypted CAS3+ mileage recalibration
8. Mercedes-Benz mileage recalibration
9. BWM CAS4 5M48h key Tool
10. Renault Key Learning for new model (2008~)
11. BMW EGS synchronization

How to use the FVDI software USB dongle:
1)Ensure there is good network connection environment
2)Run “ABRITES Quick start”. Select quick link icon on desktop and open “ABRITES quick”. Then select vehicle icon, software is running when the Dongle icon on the right-bottom of the desktop pops out.
3)Plug the software dongle into the computer/laptop
4)Run commander software
5)Because the Dongle and TAG key programmer connect to the same port of FVDI, so users cannot connect the USB Dongle and TAG software at the same time. When “Connect TAG programmer appears” message pops out, please disconnect the USB dongle as soon as possible and plug in the TAG key programmer quickly. After complete programming transponder, then connect the Dongle to carry out online function.

NOTE: FVDI ABRITES Commander can only work on Windows XP (SP2 or SP3). It cannot work on VISTA or WIN 7.

How to get 2015 FVDI additional software:
1) Order one FVID commander and pay authorization for the additional software you want, we will activate the software authorization for you.

2)Obd2tool.com has launched new 2015 FVDI with full 18 software with one year using limitation. After one year you need pay authorization fee again to continue use it. One year time calculate from the day you purchased it.