35160WT mileage correction with Yanhua 35160 35080 Emulator

Using one single Yanhua 35160 / 35080 emulator, 35160WT EEPROM mileage adjustment can be done. This post offers step by step operation procedure.


Guide in words and images:

1.Solder the 35XX chip on the meter to the specified location of the simulator,

pay attention to the chip direction.


2. Plug the emulator to the Mini usb cable, then plug into the usb port of computer.


3. Create a new folder on your desktop, for example, named “mileage modification.”


4. Copy the compressed file “35xx mileage modification tool .rar”and paste it onthe desktop “mileage modification” folder. Extract it to the current folder to get the file of “35xx mileage modification tool .exe”


5. Copy the original data to the “Mileage Adjustment” folder on the desktop .According to the original car chip model, select the corresponding original data and copy it to the “mileage modification” folder on the desktop.

(If the original car chip is 35080, choose 35080 raw data.bin; if the original car chip is 35160, choose 35160 raw data. bin)


6. Open the “mileage modification” folder, drag the original data to the modification tool or double-click to open the “35XX mileage modification tool”, drag the original data into the tool interface and press Enter to confirm.


7. Enter the mileage data you want to modify as prompted (Note: don’t forget to input the unit, for example: XXXkm or XXXmi), then press Enter to confirm, and the new file 35xxx raw data _yyyy.bin will be automatically generated.


8. Open the “35XX Memory” USB flash drive, delete the 35xxx simulated data  .bin file of the corresponding chip (note the “simulated” data file), and then copy the 35xxx original data _yyyy.bin file generated in the “mileage modification” folder to the “35XX memory” U disk.

35160WT-mileage-correction-with-Yanhua-35160-10 35160WT-mileage-correction-with-Yanhua-35160-11 35160WT-mileage-correction-with-Yanhua-35160-12

9. Data comparisonRe-plug the simulator, open the “35XX memory” U disk.

Compare the newly generated simulated data of the corresponding chip and the modified data in the “mileage modification” folder. If the data is the same, the operation is successful. Solder the simulator to the instrument chip location.

35160WT-mileage-correction-with-Yanhua-35160-15 35160WT-mileage-correction-with-Yanhua-35160-16

10. Done. Yanhua 35160 / 35080 programming Emulator correct mileage for 35160WT complete.

Tip: The copied raw data.bin file is recommended to be saved to the computer, so that the data can be recovered when the operation is wrong. If the operation is abnormal, don’t be nervous. Unplug the usb and plug it back to restore normal.

V2019 Super DSP3 Odometer Correction Vehicle List

Comparing v2017 Super DSP3 mileage programmer, the newest V2019 Super DSP III adds newer vehicles, including Audi/VW/Skoda/SEAT MQB platform and Benz/Land Rover/Jaguar/Volvo/Porsche 2010-2017 models.

2019 Super DSP3+ Odometer Correction Car List:


The above new updates are for car models with platform mqbab-(continental/vdo) from 6/2014.


DSP3+ (model supported by DSPIII) fully supports Audi/VW/Skoda/SEAT/Bentley/Benz/Land Rover/Jaguar/Volvo/Porsche 2010-2017 models, as follows:

V2019-Super-DSP3-Odometer-Correction-Vehicle-List-4 V2019-Super-DSP3-Odometer-Correction-Vehicle-List-5 V2019-Super-DSP3-Odometer-Correction-Vehicle-List-6 V2019-Super-DSP3-Odometer-Correction-Vehicle-List-7 V2019-Super-DSP3-Odometer-Correction-Vehicle-List-8

VAG MQB Platform odometer reset vehicle list:

vw/golf sportsvan 06.2014- nec35xx diag    by obd2

vw/golf mk7 06.2014- nec35xx diag    by obd2

vw/passat b8 06.2014- nec35xx diag     by obd2

vw/polo 06.2014- nec35xx diag    by obd2

vw/tiguan 06.2014- nec35xx diag by obd2

vw/touran 06.2014- nec35xx diag by obd2

audi/a3 06.2014- nec35xx diag     by obd2

audi/q2 06.2014- nec35xx diag     by obd2

skoda/fabia 06.2014- nec35xx diag by obd2

skoda/rapid 06.2014- nec35xx diag      by obd2

skoda/octavia 06.2014- nec35xx diag    by obd2

skoda/superb 06.2014- nec35xx diag    by obd2

seat/ibiza 06.2014- nec35xx diag   by obd2

seat/toledo 06.2014- nec35xx diag by obd2

seat/leon 06.2014- nec35xx diag   by obd2

*attention:the above new updates are for car models with platform mqbab-(continental/vdo) from 6/2014

V4.94 Digiprog III With FTDI Chips For Sale With Honest Reviews

Digiprog 3 V4.94 was the well-known OBD2 Odometer Correction Tool for univeral car models. And today, obd2tool.com official blog will share a V4.94 Digiprog III With FTDI Chips Reviews to help customers better know why Buy V4.94 Digiprog III Digiprog 3 With FTDI Chips For Sale will worthy the values.

Digiprog III 4.94 Full Set Unboxing Check


As you have seen, Digiprog 3 V4.94 Full Set contains cable for multi car models programmer.

V4.94 Digiprog 3 Digiprog III was well made with great quality and has been tested by many customers,100% workable for following car models

Mercedes Benz:

Mercedes W251 R350 2010 OBD ok

no sync problems no can filter needed!

Mercedes Vito W638 2003 OBD ok

Mercedes B-Class W246 use direct in OBD ok

Mercedes w211 2003 read and Save cluster EEPROM via EEPROM / MCU ok

Volkswagen Group:

Digiprog do all Golf 4 without problem!!! And all golf 6 digiprog 3 clone work good for me till 2013 year

Golf 6 plus 2010 work ok

VW Caddy 2013 done throw menu Golf 6 2012>

VW Touareg 2004 OBD ok

VW Polo, Seat Ibiza 2007 Magneti Marelli Motorola ST48 by points OK

I have done Seat Leon 1M 2000 2002 and 2003 with digiprog3 V4.94 via OBDII no problem

T5 2004 dash & ECU via OBD -read? /write ok 10 seconds. ECU EDC16 read write ok 7 minutes

Sharan 2001 via OBD- read? /write ok

Skoda Octavia 1z 2011 OBD ok

Skoda Fabia 2009 OBD read? /write OK

Skoda Fabia 2010 OBD, read? /write OK after second try

Audi A6 2010 dash via OBD, it takes a while to find code but successfully do it

Audi A3 2010 by OBD OK

Audi TT 2002 obd2 n8 is ok work

Audi S3 2002 obd2 is ok work

Audi A3 2002 obd2 is ok work

Audi A6 2002 ok after some effort.

Audi A4 2007 OBD dash read write ok

Audi A4 8e b6 2004 OK in 2 minutes

Audi Q7 2007 via OBD work

Audi Q72012 by OBD work ok


My Digiprog 3 unit works on 2017 BMW I8! Good luck!

Nissan Navara, Pathfinder Motorola ST48 by points OK

Fiat Ducato 2014 OBD dash ok

Mitsubishi galant 2006 93C46 ok

Saab 9-3 2009 HCS12 ok

Ford Mondeo 2010 Visteon dash with 9s12 read write ok via 4 wires on PCB

Peugeot 307 2002 —> Work Dash —> NEC (New ST59) BSI —> HC12

Passat 2013 by OBD ok

2014 Porsche Panamera by EEPROM 95640 work ok

2011 Vauxhalls Vivaro… 93c76…. All good… read and write

Opel Astra G 2001 OBD read? / write ok 10 seconds.

Opel Astra H 2006 – m35080 – work

Obd2tool.com Digiprog 3 User Guide : How to setup V4.94 Digiprog3 Odometer Master Programmer

1. Connect the digiprog 3 main unit into the OBD diagnostic socket, but do not use the cigar lighter lead. Otherwise, it will lose the warranty.

2. After well connect with vehicle, the digirog 3 main unit will power on, the device is loading the system.

3 Then the device screen will display digiprog III software version information. Software is marked as s unique 12 digit electronic serial number.

4. When your digiprog 3 has finished loading an information screen will appear with a disclaimer regarding the use of the machine.


5. Click “Check/Tick” button to start using the digiprog 3 odometer correction tool.

6. The digiprog 3 will require password to enter the system. The default password is “1”.


7. Welcome the main interface. You are also allowed to check the software marked red on the picture below.


8. Select the function you need to do and follow the screen instruction.

Why V4.94 Digiprog3 was the hottest OBD2 mileages correction tools ?

1.great quality with stable peformance,tested by many customers,100% workable.

2. With FTDI Chips,and the package contains ST01/02 and ST04 Adapter.

3.coverage multi car models.

4.Cheap affordable price.

5.Easy and stable to use.

Customer’s Feedbacks about Digiprog III 4.94 Full Set


In all, Digirpgo 3 digiprog iii is a ideal and professional Odometer Master Programmer for multi cars at cheap affordable price.

How To Fix Digimaster3 CD Card lost

Customer question:

i lost my CD card in Digimaster 3, could we install the digimaster 3 software?

Answer from obd2tool.com:

1.Preparations, you could buy a new blank SD card within 8GB.

2.Go to the YANHUA TECH official website to donwload software:


3.After software downlods,you should unzip the software file first ,copy it to the new SD card,there is an operation instruction in the file package, follow the instructions to synchronize the SD card program.

Add other Customer asked questions:

Q: Digimaster 3 and digiprog 3 are both odometer correction tools, can you tell me the difference. Digimaster 3 is so expensive, i want to know it better.
A: Digimaster 3 has the main function of Digiprog 3, but the car models they support are different. Such as Didiprog 3 support Benz/BMW/Porsch key programming function, while digimaster support more car models for airbag reseting function. The relationship of the supported car models is not coverage, but complementary. Digiprog 3 has 8 kind of language to choose, while Didiprog 3 only has English language.

Q: How to update it?
A: Our Odometer Correction Tool digimaster 3 is updated online. You can follow our user update manual to update on the website.