Category: VW Trouble Repair

VAS 6154

For the vas 6154, how to connect with the wifi

For the vas 6154, how to connect with the wifi Recently so many customer asked us, the VAS 6154 is with bluetooth or wifi ? and if it with the wifi, How to connect with wifi? https://www.youtube.com/watch?v=DGOItCT7ZIk First introduce the VAS 6154 For your reference as following : Now the newest

program-2014-vw-passat-akl-via-lonsdor-k518ise-1

How to Program 2014 VW Passat AKL via Lonsdor K518ISE

Question How to program 2014 VW Passat all keys lost in engineering mode with Lonsdor K518ISE Key Programmer? And how to get its IMMO data? Procedure Note: It does not support MQB all key lost. Please go into engineering mode firstly: Immobilization >> VW >> IMMO4 >> Select IMMO manually

How-to-Reset-Service-Reminder-Message-on-VW-Jetta-Car-by-XTOOL-A80-Pro-2

How to Reset Service Reminder Message on VW Jetta Car by XTOOL A80 Pro

Reset service light on Volkswagen Jetta car using XTOOL A80 Pro (H6 Pro) with VCI box. Main steps: The device used is XTOOL H6 Pro. But the guide also applied to A80 Pro. Connect XTOOL VCI to the vehicle via main cable, and connect to XTOOL tablet via Bluetooth Go

Autel-IM508-IM608-V5.10-VW-Advanced-Mode-Key-Programming-Guide-1 (2)

Autel IM508 IM608 V5.10 VW Advanced Mode Key Programming Guide

The V5.10 update for VW software on Autel IM508 & IM608 was released on 8/12/2021. Now the new version supports MQB IMMO IV IMMO IV+MQB key programming (Add Key & All Keys Lost) through online calculation. The general steps are: VW software installed>>Advanced mode>>Send request>>send the VIN number to the dealer>>Get