Autel IM508 & APB112 All Keys Lost Programming for Toyota Camry 2016

This post show you guide on how to use Autel IM508 and Autel AP112 to do all keys lost programming for Toyota Camry 2016.



Connect Autel IM508 to Toyota Camry OBD port,and connect Autel APB 112 to IM508


Enter “IMMO” menu–>Toyota–>Manual Selection–>Other


Then select “Camry”–>Smart key–>Keyless System(CAN)


Now select “Back UP Immobilizer Data”

This function is use to back up the EEPROM data of the smart box of the vehicle.The data can be used to generate the simulator key for emergency start of the vehicle to perform the key matching function.

Click “OK” to continue


Reading immobilizer data (make sure im508 connect to network)


After then save the EEPROM backup data file

Now press “OK” button to back,and select “Generate Simulator Key”


Select the EEPROM data.


Choose the backup file you saved just now


Retrieving critical data…


Key Type:SLK3


It will prompt you to connect APB112 key simulator,press “OK” to continue


Burning firmware please wait…


Now Autel IM508 programmer show you simulator key is generated successfully

Back to menu to select “Add Smart Key”


Press “Yes” to use simulator key

Note:Each step must be completed within the specified time


The positions for learning include:5

Click “OK”

Put the simulator key APB112 close to the START button



Then you will sound a beep,remove simulator key

Put the new smart key to learned close to the start button


After get two warming sound “Beep Beep”,remove new smart key from START button

Registering,please wait…


Learning succeed.


Now you can test the new smart key on vehicle.



How to Program a key on Mercedes Benz Vehicles with Autel G BOX Benz & BMW Adapter if All Keys Lost?

AUTEL G-BOX Mercedes All Key Lost BMW DME Reading

Usee with both the Autel MaxiIM IM608, IM508 and Auro IM600.


Autel G-Box Adaprer is designed for Mercedez-Benz vehicles with DAS3 CAN EIS/EZS in AKL. It helps to reduce the time for reading the ECU data from W204 and W207 EISs by over 85%.


Mercedes Benz DAS3 All Keys Lost solution: you should have one Autel G-BOX + Autel MaxiIM IM608 /IM600. Or have one Autel G-BOX + Autel MaxiIM IM508 /IM100 + one Autel XP400. Done via OBD or done on Bench.


This method is suitable for Mercedes-Benz W204, W207, W216 and W164 EISs after the 2009 year.


How to connect step by step? 

1)Plug the G-Box to the vehicle’ s OBDII.

2)Remove the fuse of vehicle EIS, connect the Relay ports to the fuse using the fuse cable (in the package).

3)When the vehicle has an ELV, plug to the K7 port and ELV plug using the supplied K-line cable.

4) Plug the G-Box to the Autel Diagnostic Tablet (MaxiIM IM608, IM508 +XP400 adapter).


How to do on bench When All Keys of Mercedes-Benz Vehicle Lost?

This Method is suitable for all Mercedes-Benz EISs that are already supported by Autel Diagnostic Tablet.



How to connect step by step?

1.Plug the G-Box to the Mercedes-Benz EIS using the packed DB15 Cable

2.Plug to the DC port of G-Box using a power adapter (DV 12V)

3.Plug the G-Box to the Autel Diagnostic Tablet (MaxiIM IM608, IM508+XP400 adapter)


Next is Autel G-BOX test reports:

1.Mercedes-Benz all keys lost, faster password calculation.

– 8x times faster password calculation for EIS W172, W204, W207;

– 4x times faster password calculation for EIS w209, w211, etc.


2.Mercedes-Benz all keys lost, no more repeated insertions and removals of IR simulator W164/-2008,W251/-2008,W164/2009-,W169,W251/2009,W216, W221(partial),W202(K)/W208(K)/W210(K), W203(K)/W463(K)


3.Mercedes-Benz all keys lost, can be programmed on the vehicle without removing the EIS except for EIS W164/-2008, W251/-2008, W221, W202(K)/W208(K)/W210(K), and W203(K)/W463(K), all other EIS can be programmed on the vehicle directly.


4.Mercedes-Benz all keys lost, BMW DME/DDE ISN reading and writing in boot mode 23 categories of Bosch engine, including MEVD/EDC17. 6 categories of Simens/continental engine, including MSD/MSV engine.