How to Read ISN DME for CAS EWS3 EWS4 System with BMW E/F Scanner?

BMW E/F Scanner II Full Version Feature:

1.Basic features modul

2.E-series Coding module

3.E-series CAS1, CAS2, CAS3, CAS3+  mileage Reset

4.E-series keyprog module

5.FEM/BDC mileage module

6.F-series mileage correction module

7.FLASH calibration READ/WRITE calibrations for F and G series models

8.ISN reset for F-series HP8 gearbox

9.FEM/BDC keyprog module

10.ISN MSx8x (SIEMENS) for BMW

11.F-Coding module

12.Tricore module for BMW

13.CAS4 CAS4+ F-series keyprog module with F-ISN

 

BMW E/F Scanner (BMW-Explorer) software program has the function of reading the  ISN synchronization code via the OBD-II in the computer with a DME / DDE engine from Siemens and Bosch.

 

Applied model:

CAS: all versions of CAS1 CAS2 CAS3 CAS3+

EWS3 system

EWS4 system

 

 

Reading ISN DME (CAS System)

Go to the CAS control unit, “Additional functions”, “Reading ISN”

In the opened window ISN will be displayed.

If the machine is equipped with the EWS3 system where 2 bytes of the constant part and the change are used, it will be displayed in the window 2 bytes of ISN DME (the upper 3 windows will be empty), if necessary they can be changed.

If the machine uses the EWS4 system, then 16 bytes of constant synchronization are used and there is no variable part.

Also after 2006, CAS3 uses an anti-theft code for EGS

If there is an EWS3 system in the car, then this code is the same with the engine control unit, if the machine already has an EWS4 system, then EGS uses separate 2 bytes

The program is in place of the engine ISN, it will display the gearbox code .. as in the picture below

1

 

Reading ISN DME (EWS3 System)

Come into ECU the DME/DDE engine, choose “Additional. Functions” and “ISN”

In the engine control units, the program supports reading the anti-theft ISN code via the OBD connector

To do this, open the control block identification window further in the additional reading functions ISN

2

 

Reading ISN DME (EWS4 System)

Come into ECU the DME/DDE engine, choose “Additional. Functions” and “ISN”

In the engine control units, the program supports reading the anti-theft ISN code via the BMW Explorer OBD connector

To do this, open the control block identification window further in the additional reading functions ISN

3

BMW Scanner V1.4.0 on Windows 7 64 bit

V1.4.0 is the update version of BMW Scanner. The required operating system is Windows XP. But I have hooked it up successfully on Dell 360 Windows 7 64 bit system. Following are my attempts, you can have a try.

1) First of all, install BMW scanner software

2) Plug the BMW scanner V1.4.0 interface to your vehicle’s OBD2 socket after complete software installation, but do not connect it with your PC/laptop at this time

3) Wait several seconds and plug the interface to the computer USB port

4) Download FTDI driver on the http://www.ftdichip.com/Drivers/D2XX.htm web site. It is not difficult to perform according to the window instructions.

5) A black DOS message will show up and then install the driver after downloaded it on your computer.

6) Go back to the main program, find out device manager and click BMW Scanner to select driver software you want to update.

BMW-Scanner-V1.4.0-on-Windows-7-1

7) Select “Browse my computer for driver software”>> “Universal serial bus controllers”>> “FTDI driver” >> “USB Serial Converter”, then accept window prompt to go on operation

BMW-Scanner-V1.4.0-on-Windows-7-2
8) Install the FTDI driver

9) Wait some seconds until the BMW scanner detects the software. Run software and select your options after successful install driver

Warm Prompt: You can download a secure program from Windows XP Mode, Virtual PC and Microsoft before operating.

(Solved) VVDI2 BMW 5.6.0 error need higher firmware support

VVDI 2 BMW 5.6.0 new tool arrived, Just tried to make key for BMW and i got that message on the screen saying “This version need higher firmware support, please update your VVDI2”. Not making key anyway. Obviously its latest firmware and software on PC.

49-1

Solution:

Sorted. I think my BMW soft dont like Win10. Works fine in Win7 tho.

How to Update for Bmw Icom Abc Programming Firmware

For BMW ICOM A2+B+C diagnostic coding is expert auto programming instrument for BMW. Do you know icom Technique and Boot firmware version or BMW Icom Application firmware edition? And How to update for BMW ICOM ABC Programming Firmware?

For BMW Icom ISIS ISID A+B+C For bmw icom ABC diagnostic device

Here car diagnostic obd provider will happy to explain to you that the bmw icom firmware up-to-date to 3.08.02 model now.

For BMW ICOM Firmware Edition:

If you want to update your Auto key Programmer BMW ICOM A B C hardware, you can contact us. We can give you cost-free update if you get BMW ICOM ABC Programming from CnAutotool.com maybe you can attempt by yourself as follows:

How to update ISIS ISID ICOM A B C for BMW Firmware through internet?

Try this method below:

1).Use your cable and join BMW ICOM to port

2). Energy ICOM by 12V electrical power adapter or from 1x DLC

3). Use your browser (IE) and browse 169.254.ninety two.38:60080/
Person identify: root
Password: NZY11502

4). Click “Update Firmware”, and you can discover the edition of firmware.

5). Select ICOM-BootImage-XX-XX-X minix neo x8 android tv box.bin, set picture type to “Program”, simply click “Send out the file”

6). When it will say “Compose the graphic file to the flash?”, simply click “Of course”, then the ICOM led it will been Pink

7). When it will say “The Technique Picture update was successfull”, click “Update Firmware”

8). Select ICOM-ApplicationImage-XX-XX-XX.bin, set image type to “Application” simply click “Deliver the file”, the file is big so it will consider some minutes to finish have tolerance.

9). When it will say “Create the graphic file to the flash?”, click “Yes” then the ICOM led it will been Red yet again

10). When it is alright, simply click “reboot”.

This Report is driven by Auto diagnostic obd. Hope our sources will be beneficial for individuals who wanna to know a lot more about automotive technician car workshop, garages and locksmiths…

If you are interested in this subject or any guidance, welcome to make contact with AutoDiagnosticOBD.com—China specialist auto diagnostic obd2 tools Centre.minix neo x8 android tv box

(Sharing)Super BMW ICOM A2 USB WIFI setting problem

ICOM A2+B+C for BMW 2017.7V Engineers Version is a professional and best diagnostic and programming OBD2 scanner for BMW. Recently, many fellows called me for Super BWM ICOM A2 USB WIFI setting problem. Here are some successful tips for sharing.

1.Insert usb wifi to the usb port on your computer;

31-1

2. Turn off the build-in wifi on the computer or make the additional wifi not work; that is, your usb wifi of your equipment is the only wifi on your computer. Don’t connect the wired Internet access to the Internet and equipment cable.

3. Press the button to make your computer start after you are sure that you have done all about Step 2.

4. Make sure that the network is turned off and cannot be connected to network cables.

31-2

This DWA-131 is your usb-wifi. It cannot be turned off. It is normal to show the mark of a red cross.

5. The software starts and choose WIFI for ICOM on Youobd2.

31-3

6. Connect Icom A2 to your vehicle and you will see that the lights of wlan do not flash or flash slowly after waiting for 20-60s.

31-4

It means that both usb wifi and icom A2 wifi are ok.

7. Now you can click diagnosis or programming software.

31-5

This prompt information is OK

8. Please minimize the interface for it is not allowed to be closed.
31-6

9. The equipment can be recognized normally.

31-7

Download 06.2017 BMW ISTA-D 4.05.32 Standalone (NEW)

Good news for sharing: Here you can free download 06.2017 newly released BMW ISTA-D 4.05.32 Standalone + BMW ISTA-D license!

Check below mega links and ISTA 4.05.32 update info!

ISTA-D 4.05.32 Standalone

FASTA & HW check is off

Last firmware for BMW Diagnostic ToolBMW ICOM Next included.

Edit: License added for who needs.

http://forobd2tool.com/wp-content/uploads/2017/06/10-1.jpg
http://forobd2tool.com/wp-content/uploads/2017/06/10-2.jpg

Note:

Both are working links. No pass, free to ALL…

Thanks Spider80’s sharing and enjoy at your own risk!

Here also share with you V03.2017 BMW ISTA-D 4.04.12 ISTA-P 3.60.2

Tested OK by pros and work 100%!

http://forobd2tool.com/wp-content/uploads/2017/06/10-3.jpg

BMW ISTA 4.05.32 ISTA 4.04.12 Suitable Tools:

BMW ICOM A2 WIFI

BMW ICOM A3

BMW INPA K+DCAN Cable

BMW ENET Cable

(06.2017) BMW Rheingold ISTA 4.05.23 Update Information

BMW Rheingold new system for BMW diagnosis

Works with ALL BMW E and F series 1995-2017

–Language: ENG, GER, FR, RU, OTHER

–Ultimate Ediabas/ISTA+ voltage control

–Hardware check disabled -can use the program on the slower laptops.

–ISTA contains all the functions required for programming vehicles of the F, G and I series and for Motorrad models with vehicle electrical system 2020 (BN2020).

–With Technical Information (TIS) and Wiring Diagram (WDS).

–Ediabas and all necessary tools included.

–Included components (32-Bit & 64-Bit)

–Included :

ISTA User Manual EN,DE, IT,PL,RU,TR,CZ,ES,FR,JP,KR,NL,SE

NET Framework 4.6 + Updates

Java Runtime Environment 8

DirectX 9.0c Extra files

General runtime files

Microsoft Visual C++ Runtimes (v2005 – v2015)

Microsoft Visual J# 2.0 SE

Microsoft Silverlight 5

Adobe Flash Player (Opera, FireFox, Internet Explorer)

Shockwave Player 12 (Internet Explorer Plugin

Ediabas

–Suitable for BMW Motorcycle

–BMW ISPI ICOM-FW 03-15-00

–BMW ISPI ICOM-Next-FW 03-15-00

BMW ICOM ISTA+ 4.05.32 Standalone Operating System Required:

Windows 7 (32-bit or 64-bit)

Windows 8 (32-bit or 64-bit)

Windows 8.1 (32-bit or 64-bit)

Windows 10 (32-bit or 64-bit)

BMW ISTA+ 4.05.32 Standalone Hardware Required:

Processor (CPU): Intel Pentium 2.0 GHz, Core Duo 2.0 GHz or better

Memory (RAM): 3 GB or more

Hard drive (HDD): 22 GB free space on disk