CG-Pro Update to V1.6.0.0 Add Land Rover Disscovery 3 Immobilizer

22-1

NEW!! CG-Pro V1.6.0.0 updated !!
This update adds immobilizer for Land Rover Discovery 3, new dashboard for some models, what’s more, support more chips.
More information, please go ahead:
1. Add Immobilizer
Land Rover Discovery 3
2. Add Dashboard
Honda Fit High
Honda Fit Low
Honda Vezel
Honda XR-V
Honda Greiz
Hyundai 2016 Carens
Hyundai Sonata 9
Hyundai Sonata 9 V2
KIA 2016 K3
KIA 2016 K5
Suzuki 2017 Jimny
BMW F Series (3 Series)
ChangAn ZhiXin II
3. Add Gateway, Support for CGMB Gateway data writes
Benz 204/212-1L15Y (FLASH)
Benz 204/212-3M25J (FLASH)
4. Add chip
Motorola-9S08 9S08LG16-0M48V
Motorola-9S08 9S08LG16-0M48V
Fujitsu MB91F061S
Fujitsu MB91F062BS
Fujitsu MB91F467S
Microchip PIC18F24J11
Microchip PIC18F25J11
Microchip PIC18F26J11
Microchip PIC18F44J11
Microchip PIC18F45J11
Microchip PIC18F46J11
Microchip PIC18F26J13
Microchip PIC18F27J13
Microchip PIC18F46J13
Microchip PIC18F47J13
Microchip PIC18F24J50
Microchip PIC18F25J50
Microchip PIC18F26J50
Microchip PIC18F44J50
Microchip PIC18F45J50
Microchip PIC18F46J50
Microchip PIC18F26J53
Microchip PIC18F27J53
Microchip PIC18F46J53
Microchip PIC18F47J53
Microchip PIC18F6620
5.Fixed the problem that CAS2-2K79X read failure
6. Optimizing code to improve the stability of program operation.

How to Add Benz W639 with CGDI Pro and CGDI MB

This post show a guide on how to use CGDI Pro 9S12 and CGDI MB to add new keys for Benz W639.

Procedures:

Step 1:Read EIS Data

Check the EIS number

34-1

EIS PCB chips:

34-2

Run the CG Pro 9S12 software:

Select “Anti-theft Computer”,”Benz”,”EIS-639 (HC08)”

34-3

Then follow software wiring diagram to connect the cable connector to EIS PCB.

34-4

CGDI Pro 9S12 wiring connection to EIS

34-5

Click “Read” to read EIS data

34-6

After EIS data reading successfully,save it on your laptop.

Step 2:Adding New Key

Run CGDI MB software and load EIS data you save before.Then software will show the password.

34-7

Then click “Save EIS Data”,and you would better to use default file name to save it.

34-8

Click “Generate EE”,then click “Load EIS File” button to load the EIS data.(This EIS data saved by CGDI MB software,not by CGDI Pro software.)

34-9

After EIS data loading,pls check data information.

34-10

Then click “Generate Key File”,and wait…

34-11

Then the CGDI MB software will prompt you “key file generate successfully”,you need to save the data file.

34-12

Select “Read/Write Key”

34-13

34-14

Insert new key you want to add into Key Programmer CGD MB slot.

Click “Read”,the software will show this blank key information

34-15

Click “Open/Write”,and check the warning massage:

Smart key please choose 41 format,common key and BE key please choose 51 format.

When writing the original key,you need to use CGDI MB from www.obd2tool.com to erase the key data before,otherwise the programming progress will fail.

34-16

Choose a unused key data file,and open it to continue writing progress.

34-17

After writing successfully,install EIS back on vehicle,and then perform key learning.

34-18