Tag: Mercedes SD C4

fixed-mb-sd-c4-unable-to-start-on-win10-7

Fixed! MB SD Connect C4 Software Unable to Start on Win10

Problem MB SD Connect C4 software unable to start or automatically repair on Win10. Solution Step1. Go to advanced options; Step2. Go to troubleshooting; Step3. Go to start up settings; Step4. Start PC; Step5. Computer press F4 to enter state mode; Step6. Press the “Win+R” shortcut key to open the

install-mb-sd-c4-batteries-1

MB SD C4 Batteries installation

The latest MB Star Compact 4 wireless boot diagnostics have been established from the V2021.03 hard drive. Do you know how to use it? The installation of batteries is the first step. The following are step-by-step instructions for installing MB SD battery SD. 1. Prepare the following tools: ①— SD connect

Sdconnect-C4-Activation

Fixed! SDConnect C4 Hardware ID Changed and Xentry Won’t Start

I have mb Sdconnect C4 to activate code for WIS, EPC, xentry and dts Monaco, and then contacted obd2tool.com engineer and they said ” You can send the activation id to calculate the password, or send it to teamviewer to activate the software for you remotely”, then they connected with

benz w176

(Solved) SD connect C4 does not woke on w176

I have a w176 (a gasoline with 270 engine year 2013) and it is a pain in the ass. The car came with a platform because it would not start. I run a quick test using the SD Connect C4 mux and all control units were clear. i tried to start

How-to-Use-Vediamo-to-Deactive-Belt-Warning-for-Mercedes-Benz-W-172-1

How to Use Vediamo to Deactive Belt Warning for Mercedes Benz W 172

This instruction is show you guide on Mercedes Benz W172 seat belt warning deactivation via Vediamo. Steps: 1. Connect MB Star C4 to vehicle, then run vediamo. 2. ECU: Instrument Cluster-IC172 3. Always click SG-codieren at the end 4. Hard reset should be performed afterwards