2015 Jeep Tyre pressure sensor programming operation method by launch x431

【X431PRO Function】2015 Jeep Tyre pressure sensor programming operation method.

Actual Car Model：Jeep，2015，VIN=1C4PJMCB2EW2*****，see pic1;

Function Description: after changing tyre monitor sensor, The tire pressure monitoring is restudied.

Note:
Operation Instructions
1)Select Jeep software V30.21 above；
2)Select 16PIN connector;
3)Select manual selection；
4)Select Jeep；
5)Select 2014 (VIN 10th)（Actual 2015。）；
6)Select Cherokee；
7)Select RFH (Hub)；
8)Select“Programming tyre sensor identification” prompt see pic3；

9)After click“confirm”，Prompt the requirements of this function .The ID of sensor can be found on the sensor. See pic4;

10)Select the tyre sensor that need be programmed. See pic5;

11)Input the ID of sensor see pic6；

12)Programming the sensor，pic7；

13)Tyre sensor ID programming successful.