1.Q: Why to choose this PCMtuner?
A:
a. Tuner design it, more suitable.
b. We know what tuner want.
c. Not only for chip tuning but also for locksmith and ecu repairs worker.
d. Not only just for read and write, but can supply more solution for you when you have our tool.
e. We are from a tuner group, so we can give more support for all our legal user.
2.Q: What other functions can PCMtuner do besides reading and writing ECU?
A: All functions supported are in the following list:
Read and write data via OBD/BENCH/BOOT mode
ECU clone
ECU parameter adjustment
ECU maintenance engineering
Chip tuning
Read ECU maps
Checksum correction
Stage1-3, gearbox tuning , LC, sportdisplay , immo off, adblue off, dpf off, dtc off , vmax , swirl off
Read flash and ep files
Powertrain adjustment
Support online update
VR files supply
Pinout comewith
Helpdesk and tuner account
OBD2 reading
Cover-free wielding-free no disassembly data reading, greatly reduce the risk of destroying the ECU, bench mode.
Cover-opening data reading, boot mode
3.Q: Is it the master version?
A: Yes, it is. Read and save data in Bin format. Data is not encrypted.
4.Q: Is there an annual fee for upgrading PCMtuner in the future?
A: No. It supports free update online for lifetime. No subscription, no annual fee.
5.Q: Does it need to connect to network?
A: Only VR and software update need to operate online. Other functions can be done offline.
6.Q: How to connect PCMtuner via OBD or bench?
a.via OBD
Connect PCMTUNER to the computer by USB cable, and connect to the vehicle via OBD cable
b.on bench
Connect PCMTUNER to the computer by USB cable, and connect to ECU by the professional harness, and supply the power.
7.Q: V.1.20 KTM200 also supports 67 modules. What’s the difference between it and PCMtuner V1.21?
A: Both of them support the same functions, language, ECU models and operating system (Win7& Win10).
The differences:
Made by different manufacturers
Hardware configurations are different
Use the same software, but the version is different. PCMtuner is V1.21, KTM200 is V1.20.
PCMtuner supports software update online, but KTM200 doesn’t support.
8.Q: Can PCMtuner v1.21 clone a Siemens SID 801 read and write ECU and a dcm 6 bosh?
A: Supports Reading, writing and checksum correction for most Bosch, Siemens/Continental, Delphi ECUs, etc.
Possible password reading for SIM2K-24x, Ford EMS22XX, Ford SID20X, Bosch, Bosch GPT, etc.
9.Q: Do I need to download the software before using PCMtuner?
A: No need. It comes with a CD.
10.Q: PCMTUNER 1.2.1 support scania S8?
A: PCMTUNER does not support scania S8.
More information about Car ECU Programmer, Please refer to www.obd2tool.com
Leave a Reply