Higher Quality Piwis Tester II Diagnostic Tool For Porshe With CF30 Laptop and Latest Application PIWIS II V18.1 Piwis Tester II is the newest specialist tester for Porshe,the most poweful diagnose and offline programming tool for Porsche,with most recent tester for Porsche,effective functions,full access. Folling is The way to Perform a Forced PDK Update by means of Porsche PIWIS II
Applicable Model/Year
2013-2016 Porsche 981 Cayman and Boxster (Base, S, GTS) w/ PDK Transmission
2012-2016 Porsche 911.1 NA Carrera (Base, S, GTS) w/ PDK Transmission
2014-2016 Porsche 911 Turbo and Turbo S w/ PDK Transmission
The way to Enable
This function should be performed by a car diagnostic tool Porsche PIWIS II. It will be achievable having a PIWIS III however the workflow procedure may possibly vary.
When And Why to Update
A forced PDK update is needed when a car possesses the Q033 ROM and an open campaign update isn’t visible by way of the PIWIS tool. This procedure will update the PDK to a Q061 or newer ROM.
This update is essential to run the newest PDK OTS maps with custom characteristics including quicker shift speeds, sequential shifter stalk, dual paddle to neutral, no kickdown, and no creep. These features would otherwise not be possible running the Q033 ROM.
Things To Appear Out For
The update process does take some time (30 to 45 minutes), so it truly is critical to possess a battery charger (10A to 12A suggested, or a charger using a “flash” setting will operate) around the car’s battery for the duration of this process. It would also be a good thought to maintain a charger around the PIWIS II personal computer also.
When you have a Piwis III tool, the workflow process could slightly differ.
Measures to use
NOTE: Just before PROCEEDING, ACCESSPORT Must be UNINSTALLED FROM Automobile.
1.Connect a battery charger for the car’s battery, put the key in the “ON” position (engine off), and turn around the PIWIS II tool. The PIWIS II will must be connected for the OBD II port at his point as well.
two.At the principal menu around the PIWIS II, choose DIAGNOSTICS >> 911 >>> 991. Your selection may vary for those who have a Boxster/Cayman.
three.At this point, the PIWIS II will load up the computer software and prompt you to a brand new menu.
four.Choose the “Transmission Control” unit control. Right after this can be chosen, scroll for the correct around the prime overview bar and pick “Programming”.
You are able to now pick “Automatic Programming” and hit the “Next” button on the bottom proper of PIWIS II.
5.From right here, Unit Documentation along with the update will commence, many prompts regarding battery charger use and ignition on will seem. Continue to press the “Next” button around the bottom correct to move forward using the approach. It is possible to hold an eye around the progress bar on the bottom and Steps listed in the top. Keep an eye around the PIWIS II for any ignition off sequences or require to press the “Next” button.
6.Whenever you finish the final step, step 12, an info prompt will seem. Hit “Next” to be shown good results programming.
7.And that is it, you happen to be completed! This could be a good time to verify for any transmission fault codes and clear them if they are present. You are able to confirm you happen to be around the most recent Q061 ROM by picking the “Transmission Control” function around the principal menu and picking “Extended Identifications” on the best scroller bar.
Leave a Reply