Had Autel MaxiSys Pro ms908p Scan Tool for one year already, but never tried its ECU programming function (it is said that it’s the only one for ECU programming between Autel and Foxwell scanners, even new MS906 does not support). Today, i verified Mercedes SCN coding using the Maxisys MS908P and J2534 ECU programmer.
I did once Mercedes SCN coding:
Correctly connect Autel MS908P to J2534 ecu programming device and Mercedes
start MS908P
select Diagnosis
select Europe->Benz
diagnostic program initializing…
select Automatic selection
turn ignition on
reading VIN…
acquire VIN info
select date of manufacturer: as of 12/2015
please select the steering
here, press button Right to select right-hand steering
confirm vehicle info
select Programming
system data loading…
diagnostic system initializing…
select ME-SFI-Gasoline engine control
diagnostic system initializing…
select Control Module programming, but no newer control module software was found
Establishing vehicle communication…
Check network connection if good
then go to SCN coding
Bluetooth is forced to stop
enter VIN as a 17-digit code
two steps to perform SCN coding
– step 1 Get SCN data from Server
– step 2 Perform SCN coding
Establishing vehicle communication
Checking network connection
Perform SCN coding completed.
Mercedes SCN coding sequence has been completed successfully!
Online SCN Coding for MB SD C4
Leave a Reply