XTOOL X100 PAD “Stay on the loading page” Solution
Problem: after booting the XTOOL X100 PAD, I select the OBD2 function, unfortunately, it stays on the loading page. OBD2TOOL Solution: 1. Open “quicksupport” on the […]
Problem: after booting the XTOOL X100 PAD, I select the OBD2 function, unfortunately, it stays on the loading page. OBD2TOOL Solution: 1. Open “quicksupport” on the […]
How to add a new smart key on Hyundai Accent 2020 with OBDSTAR X300 DP PLUS. 6 digits PIN code is required if OBDSTAR failed […]
This article collects some Frequently-met Errors On Autel OTOFIX BT1 and Autel OTOFIX IM1 professional tools and provide respective feasible solutions for customers to refer […]
Here are the full comparison tables of Xtool X-100 Pad2 and Xtool X-100 Pad key programmer regrading function and specification. Function Comparison: Full Comparison XTOOL […]
Activation of all brands for Autel AP200 Bluetooth OBD2 scanner is possible, but without special functions (adaptation, coding), only diagnostics for all modules and reset of […]
Question How to program 2014 VW Passat all keys lost in engineering mode with Lonsdor K518ISE Key Programmer? And how to get its IMMO data? […]
Possible to change language in the Vxdiag Benz C6 WIS software? Yes, so does EPC. Check the easy guide below. The procedure is the same on […]
Remote Throttle 1). Use CAT ET to Check the Programming of the Parameter Dedicated PTO Parameters. →Connect CAT ET to the data link connector. →Access […]
The new software comes! V2021.6 MB SD Connect C4 software (XENTRY DAS) is verified to work with the MB SD C4, SD Connect C4 Plus, […]
Are you planning to buy a diagnostic scanner? The VXDIAG VCX Nano line of scanners offers some of the best options for diagnostic products. It’s […]
Copyright © 2025 | WordPress Theme by MH Themes