Tag: MB Star C4

MB SD C4 Plus Connection Error “Verify the battery” Solution

Q: I have a problem with the connection between the MB Star C4 and my car, cables and notebook are not a problem. The defect is in c4, any suggestions for a solution? On Xentry, after a blue scroll bar appears on the screen, 30 and 31 appear, I swap the

Mercedes SD Connect C4. Switching Wi-Fi channels if not stable wireless connection

Switching Wi-Fi channels if not stable wireless connection between the multiplexer SD Connect C4 and laptop. For Road24h mode. Wireless connection Wi-Fi has 14 channels. Depending on the country, the number of permitted channels may be reduced. So for example Ukraine and Russia are used 13 channels. For some WiFi

MB SD C4 Xentry 2021.3 Unknown Lan ID Solution

When activating mb sdconnect C4 Xentry 2021.3, it shows ” Unknown Lan ID”, Obd2tool.com engineer offer the working solution. Image 1: Xentry 2021.3 Unknown Lan ID Solution: *   Start -> Execute -> cmd *   Enter: set devmgr_show_nonpresent_devices=12 Enter: set devmgr_show_nonpresent_devices=1 *   Enter: start devmgmt.msc *   Click on [View] and select “Show

Fixed! MB SD Connect C4 Software Unable to Start on Win10

Problem MB SD Connect C4 software unable to start or automatically repair on Win10. Solution Step1. Go to advanced options; Step2. Go to troubleshooting; Step3. Go to start up settings; Step4. Start PC; Step5. Computer press F4 to enter state mode; Step6. Press the “Win+R” shortcut key to open the

MB SD C4 Batteries installation

The latest MB Star Compact 4 wireless boot diagnostics have been established from the V2021.03 hard drive. Do you know how to use it? The installation of batteries is the first step. The following are step-by-step instructions for installing MB SD battery SD. 1. Prepare the following tools: ①— SD connect

Fixed! SDConnect C4 Hardware ID Changed and Xentry Won’t Start

I have mb Sdconnect C4 to activate code for WIS, EPC, xentry and dts Monaco, and then contacted obd2tool.com engineer and they said ” You can send the activation id to calculate the password, or send it to teamviewer to activate the software for you remotely”, then they connected with

(Solved) SD connect C4 does not woke on w176

I have a w176 (a gasoline with 270 engine year 2013) and it is a pain in the ass. The car came with a platform because it would not start. I run a quick test using the SD Connect C4 mux and all control units were clear. i tried to start

How to Use Vediamo to Deactive Belt Warning for Mercedes Benz W 172

This instruction is show you guide on Mercedes Benz W172 seat belt warning deactivation via Vediamo. Steps: 1. Connect MB Star C4 to vehicle, then run vediamo. 2. ECU: Instrument Cluster-IC172 3. Always click SG-codieren at the end 4. Hard reset should be performed afterwards

How to Do Online Coding on Mercedes W205 with Vxdiag Benz C6 DOIP/ MB STAR C4 C5?

How to Do Online Coding on Mercedes W205 with VXDIAG Benz C6 DoIP/ MB Star C4 C5? Note: If you want to support online programming,you must have an account online. Communication with control unit ‘N3/10 -Motor electronics ‘MED40’ for combustion engine ‘M274′(ME)’ is being established. Version information. Error codes. Actual values.