How to use VVDI2 for Audi A6 4F all key lost

Post starts with this question: I have Audi A6 4F bought as dead car because it does not react to the inserted key. Immo shows NOK key inserted. I bought xprog recently and I need to advice what should I buy more to be able to create or adapt the key I got. Unfortunately it’s just my hobby so I have to purchase the clone versions. Is Tango clone solution for my problem or FVDI? I don’t want like to give it to dealer as I am glad to learn new tools and things.
Solution: VVDI2 commander
Vvdi2 can easily do it.done one of these in 20mins akl, without dismantling anything,using vvdi2.
If you don’t want to spend money for tools you can’t do the jobs so you loose money.
***If it’s just a hobby, no need to buy expensive tools… just pay a professional to do the job

Here comes the procedure of VVDI2 programs Audi A6 4F all key lost:
Remove engine from Audi a6l 2.4
vvdi2-for-audi-a6-4f-all-key-lost-01
Open Engine cover, find out the Engine position, disassemble engine.
vvdi2-for-audi-a6-4f-all-key-lost-02
Remove the engine ECU
vvdi2-for-audi-a6-4f-all-key-lost-03
Take apart engine ECU.
Next is to read this 95320 chip.
Remove 95320 chip and put it on the VVDI pro to read data.
vvdi2-for-audi-a6-4f-all-key-lost-04
vvdi2-for-audi-a6-4f-all-key-lost-05
Open VVDI pro
Select type, manufacture and model
Click “New”
Click “Read”
Successfully Read out data, click “Save”.
Take out chip from VVDI Pro and desoder the chip back to the engine ECU.
vvdi2-for-audi-a6-4f-all-key-lost-06
vvdi2-for-audi-a6-4f-all-key-lost-07
Reinstall engine ECU back to the Audi.
Open VVDI2 and click “Audi” option.
vvdi2-for-audi-a6-4f-all-key-lost-08
Select “Special function”
Select “EEPROM data processing tool”
vvdi2-for-audi-a6-4f-all-key-lost-09
Firstly calculate CS code
Select “ECU Simons PPDIX – Reset component protection data”
vvdi2-for-audi-a6-4f-all-key-lost-10
Click “Load” the load the data that read out just now, then click open.
This is CS code, take a picture to record it.
vvdi2-for-audi-a6-4f-all-key-lost-11
Next is to calculate it’s PIN code
Select “ECU Simons PPDIX – Security Access Code”
vvdi2-for-audi-a6-4f-all-key-lost-12
Click “Load” again to load the file.
vvdi2-for-audi-a6-4f-all-key-lost-13
The first step is prepared well.
Open VVDI2, click “Learning Key”- “Audi A6/Q7” Option.
Input the CS and PIN code that read out by VVDI pro, then you will see the button “Learning Key” and “Generate dealer key” are enabled.
Put OEM chip and 8E chip into VVDI2 key programmer.
Click “Generate dealer key”
Generate dealer key is done.
Next is to learning key
Disconnect the short insurance line.
vvdi2-for-audi-a6-4f-all-key-lost-14
Connect back
Take out the chip from VVDI2 and put it into ignition data coil.
vvdi2-for-audi-a6-4f-all-key-lost-15

Click “Learning Key”
Open and close car door, turn on ignition, press down brake.
Click “Learning Key”.
learning successfully.
Next is to read out EZS-KESSY(J518)EEPROM.
Click “ok”, select Chip type 9S1201128, the aim to read EZS-KESSY(J518)EEPROM is to generate OEM remote control.
Save EZS-KESSY(J518)EEPROM.
Generate OEM remote control.
Vertical put remote controller on the coil of VVDI2.
Click “Open”
Following the prompt the put the remote controller, click “Next”
Controller is generated successfully, assembled key and to test.
Test the key whether it can start the A6L.
The car can start.
Prepare to test Remote control.
Remote control is working.

Done.

How to use Xentry DAS on AVDI passthru

What is the AVDI recognized by Xentry?

Xentry Mercedes Passthru is different from from regular Xentry openshell. Xentry passthru does not use SDconnect toolkit. When you launch the program it will give you a dropdown where you can choose which J2534 device you want to use.

How to use Xentry Passthru?

If you got the Xentry Passthru installed, there is a tool which will do the dirty work for you.

Normally it is not linked or doesnt have desktop shortcut but resides (at least in my installation)
under

C:\Program Files (x86)\Mercedes-Benz\xentry\bin\SelectPTDevice

IF you have installed your passthru (would that be AVDI or anything else) with correct drivers, registry entries etc it will just present you with list of options and you select your VCI from dropdown list.

Heard good things about AVDI J2534 compatibility (real thing, don’t know about clones) so it shouldn’t be a big deal. Recently i have tried to use BOSCH KTS560 as passthru and it works perfectly okay.

For curiosity, i did also test the 20-euro MiniVCI that gets normally bundled with Toyota techstream packages. to my surprise it also works albeit slow and sometimes freezes the application. This one can be actually made to work even with old DAS like 2009, 2012….it’s just matter of proper settings in cal.ini and slave.ini

For DAS/Xentry users:

Old thread – but do not run the SetPassThruDAS.exe, as it was written for DAS/Xentry for Windows XP, and not Openshell or Xentry Passthru. All you need to do is install a fresh OS (Windows 7 Enterprise x86 or x64 SP1) ideally on a physical laptop, connect the AVDI device to the USB port and run the SetupInterface_yourserialnumber_PASSTHRU_xxxxxxx.exe and Next through the setup process. If you have a current version of the Passthru software, you will see a grayed out option for installing drivers for DAS that you cannot select, but do not be concerned about that. It will detect the AVDI, and install the appropriate J2534 dll files in the Windows\System32 directory. Then continue installing your Passthru software provided on the Blu-ray from Daimler. It will take a while to install, and once it verifies your hardware ID and installs your StartKey, launch Xentry Passthru from the icon it creates, and it will prompt you first thing as to what interface you want to use. You will see Abritus72 AVDI ABRITES Commander PT (your serial number here) in the drop down box. Select that device, and that is all their is to it. Xentry should automatically communicate with the vehicle.

How to solve FVDI 2018 Has Been Deactived

FVDI 2018 has been deactivated, how to solve?

I have this Problem with fvdi 2018 .
bought three weeks ago and two weeks no longer used and comes as a mistake, no matter which model I choose.

48-1 48-2

Suggestion:

Download the newest software + loader from http://flyobd.com site, i also did….the old V2 loader connected to their own server but v3 connects to the Fly server, mine still works…

FVDI ABRITES Commander 2018 Quickloader v5.6 free download

http://flyobd.com/shop/download-center/

Another option is

it can work without internet.

FVDI 2018 feedback:

Website has new design. And maybe things are getting better. At least you can login and download SW directly.

 

www.obd2tool.com

FVDI 2018 Tech Support

Professional tech support for FLY FVDI 2018 interface off www.obd2tool.com .

12-1

What is the difference between FVDI 2014 2015 2018?

12-2

Fvdi 2015 has v7 quickloader and it works with the last 2015 fvdi;

2018 FVDI ABRITES Commander has software with v2 quickloader including VVDI Functions For BMW and VAG

What cars are covered by FVDI 2018?

V2018 FVDI for TAG, VW, AUDI, BMW, BENZ, Renault, Peugeot, Citroen, Fiat, Ford, Chrysler, Toyota, Nissan, Hyundai, Volvo, mitsubishi motors, porsche, skoda, seat, vauxhall, dacia, jeep, smart, mini, daf, alfa romeo, lancia, infiniti, lexus, scion, kia, maybach

Have software installation problem with V2018 FVDI?
missing mfc110u.dll? Device not opened? Spawn app failed:1?
Installation tips:
1. close antivirus software; connect FVDI to computer via USB;
2. missing mfc110u.dll? Mfc110u.dll errors are caused by situations that lead to the removal or corruption of the mfc110u DLL file, which is a file associated with Microsoft’s Visual Studio software.. please find the “patch” in installation folder, install all the files in “Patch” folder; the problem will be solved;
3. Device not opened? Spawn app failed:1?
You should connect FVDI to computer before software installation; Reinstall the driver manually to solve the problemUSB driver files locate in installation folder “USB interface”.

Installation error fvdi v2018:

12-3

The program cannot start because mfc110u is missing. Dll on the team. Internet reinstall the program to correct the problem

Go to the software installation folder, you’ll find the patch folder, install all files in the folder

: C:\ program files (x86)\abries \ patch

FVDI V2018 with error: “the device has been deactive”

12-4

The Quick Loader V2.0 is out of service, and you have to reinstall V3.0 software!!
V3.0 download link: https://mega.nz/#!KRBzVIrD!uE0ZGjYAbTv0sEZPQjLN0jejex_yI0IF9R3Wad21f7g

Use Chrome browser to download directly, no need install Mega software.

How to renew 722.9 with FVDI ABRITES Commander Mercedes-Benz?
In order to renew a specific 7-Gear control unit out of the car it is necessary only to connect the CAN pins of the 7- Gear unit, as well as the GND and +12V pins. The wiring of the 7-Gear units is the following:

Pin1: CAN-H

Pin2: CAN-L

Pin4: +12V

Pin5: GND

7-Gear database download link:

https://mega.nz/#!7JJxDAaC!GmjjzZzRY7Bd323ezjiVstQnu_94zQURLE9CIIJrhps

Do you have any good success with FVDI 2018? same sw as 2015?

his 2018 version has the same software versions as the 2015 version except that has updated software for VAG and BMW/Mini which is from the VVDI software. IMMO 4 and 5 key programming is working. Only tested on 2012 Scirocco 2.0 TSi and 2014 Audi A5 2.0T.

Mercedes software still has bugs for odometer correction. W204 did not work.

Overall it is good value for money. Not as good as OBDStar X300 DP pad for keys and odometer but has many better functions like programming and calibrations.

Where to but FVDI 2018 of good quality and at the best price?

Here you go…

12-5

FVDI not work or driver won`t install, please check computer Config

FVDI 2016 not work or driver won`t install, please check computer Config

FVDI 2016 not work or driver won`t install? Then some user consider FVDI hardware is broken and send back to the seller for repair. Actually, www.obd2tool.com engineer tested and proved it’s not problem of hardware, but the compatibility of the computer and FVDI.

FVDI Commander 2016 computer configuration and operation system (OS)

1.CPU >=1.8 GHz , more than 2GB
2.OS: Windows XP, tested windows 7 32bit and prompt many system patches not found.
3.When update, if it prompts “Connecting to server…….failed” (See picture one).
Maybe the network connection is unstable, as the picture 2 shows, this user tried fine network connection when update, then get message “Connecting to server…….OK” and able to download firmware.

Real user’s Case to prove my opinion:
One user’s  FVDI 2016 not work, then contact our engineer to remote assist him, and find his computer is only with 768MB memory, use another higher configuration computer to install FVDI, finally FVDI 2015 works.
20-3

How to use 2015 FVDI software USB dongle


2016 FVDI commander comes with software USB dongle. Software USB dongle is capable of carrying out online function including:
1. AUDI A6/Q7 key learning
2. AUDI A6/Q7 VIN writing
3. AUDI A4/A5/A6/A8/Q5/Q7 component protection
4. AUDI A8, VW Touareg KESSY adaptation
5. VW MED17 EEPROM reading
6. BMW CAS3, encrypted CAS3+ key learning
7. BMW CAS3, encrypted CAS3+ mileage recalibration
8. Mercedes-Benz mileage recalibration
9. BWM CAS4 5M48h key Tool
10. Renault Key Learning for new model (2008~)
11. BMW EGS synchronization

How to use the FVDI software USB dongle:
1)Ensure there is good network connection environment
2)Run “ABRITES Quick start”. Select quick link icon on desktop and open “ABRITES quick”. Then select vehicle icon, software is running when the Dongle icon on the right-bottom of the desktop pops out.
3)Plug the software dongle into the computer/laptop
4)Run commander software
5)Because the Dongle and TAG key programmer connect to the same port of FVDI, so users cannot connect the USB Dongle and TAG software at the same time. When “Connect TAG programmer appears” message pops out, please disconnect the USB dongle as soon as possible and plug in the TAG key programmer quickly. After complete programming transponder, then connect the Dongle to carry out online function.

NOTE: FVDI ABRITES Commander can only work on Windows XP (SP2 or SP3). It cannot work on VISTA or WIN 7.

How to get 2015 FVDI additional software:
1) Order one FVID commander and pay authorization for the additional software you want, we will activate the software authorization for you.

2)Obd2tool.com has launched new 2015 FVDI with full 18 software with one year using limitation. After one year you need pay authorization fee again to continue use it. One year time calculate from the day you purchased it.