Tag: BMW OBD Software

BMW E85 Z4 SBSR Airbag Module Coding Guide

I’ve finally got a used airbag ECU for my 2003 Z4 3.0 and after fitting it the airbag light is still on. A pal used a obd2 scanner to read the fault code and the “Safety and Gateway module” shows the error “93AB Incorrect chassis number. He can clear the

ista-p-bmw

BMW Carly vs. Rheingold (INPA, NCS, ISTA-D-P)

This is for those are researching what he should buy for his BMW. The option is narrowed on BMW ICOM cable + Rheingold and Carly Pro for BMW + Carly gen2 adapter. Carly can run diagnostics and code. It can be installed only on tablets and phones. For what it does

How to restore the performance of the N53 engine

In this entry: step-by-step recommendations for restoring the performance of the N53 engine. Available diagnostics tool: ISTA D/+ Symptoms: increased fuel consumption, permanent vibration, uneven performance, low-quality idle. Notes 1. If it is possible, use INPA for F series to diagnose these engines. Unfortunately, ISTA D/+ gives very limited information,

BMW ICOM A1 A2 ISTA LAN WIFI Wireless Setting Guide

Here I want to share the guide on how to set up BMW Diagnostic Tool ICOM ISTA LAN/WIFI/Wireless Connection.Hope it helps! BMW ICOM LAN Connect Operations: 1.Connect the LAN cable to ICOM A1/A2, another side to laptop LAN port 2.Connect OBDII cable to car OBDII Port; sometimes you might need the

How to synchro EWS-DME for 2002 BMW X5 with ICOM BMW and HDD software

Try to synchro EWS-DME for 2002 BMW X5 ( E53) Engine M62 utilizing ICOM BMW and HDD computer software from China. Guide: In case your Icom and ICOM ISTA mixture is operating nicely , you may try this : 1. Make a deep diagnostic with ISTA D – to exclude

How to use bmw icom a2

Lan Connect Operation Details 1. Connect the LAN cable to ICOM A1/ICOM A2, another side to laptop LAN port 2. Connect OBDII cable to car OBDII Port; sometimes you might need the external OBDII cable. 3. Insert the USB KEY to laptop USB Port and power on the laptop 4.

ICOM A2 NCS Expert fully coding cruise control retrofit (SUCCESS)

Just fully retrofitted cruise control to my BMW ‘2010 E87 today – its was definitely the easiest retrofit i’ve done on the car – took all of 1 hour to install. Model: BMW e87 2010 Tools: BMW ICOM A2 emulator (i used the clone) together with working NCS Expert and Tool32

How to setup WinKFP for BMW E series flashing

Here is WinKFP setup/installation tutorial, based on the E60 daten from ISTA/P 2.39. This assumes you have installed INPA/Ediabas and WinKFP and they are running correctly. This was done on a WinXP 32 bit system by OBD2TOOL. 1.  Unpack the V2.39 ISTA daten folders for SP-daten-E60 somewhere on your harddrive.

Overview and short introduction

Starting the ISTA Client How to start the ISTA Client 1  Double-click the symbol on the Windows desktop (if displayed)  ; or 2  or 3  Open the application in the program file by selecting “Start – All Programs – ISTA – ISTA Client”; 4  or 5  Open the application by