Real Feedback on SD Connect C4 Dell D630 full kit for W205

Here is all about a real user feedback on SD Connect Compact 4 full kit from obd2tool.com, which was put on the OBD2TOOL and now was quoted here for reference for all potential users as consideration.

Topic: Is it worth buying a SD C4 + Xentry for the W205 yet?

*** User background information ***

I’ve been doing a lot of reading recently about the MB diagnostics software and I’m getting more and more interested in purchasing a full kit out of China with everything set up and ready to go – i.e. MB SD Connect Compact 4 Star Diagnostic tool + the 2015.09 dev version software (Xentry etc.) + a Dell D630 Laptop.

I’m hesitant, mainly because the car (W205) is so new. There’s no real need yet to do any self-service work or complex diagnostics, but I’ve always liked having a reasonably good knowledge of the cars I’ve owned. The software suite seems very comprehensive and would no doubt be a good way to learn more about the car and understand the systems, coding configurations etc.

*** Optional vendors in consideration ***

Here’s just one example, but there are heaps out there – especially from China but some from Europe as well. EBay is also full of similar kits.

Most pricing seems similar so I’m not sure how different the quality is between various vendors.

*** User feedback on SD c4 full kit from mbstarshop ***

OK.. so Curious George (a.k.a me) couldn’t help himself and just before Christmas I ordered the full kit exactly as described in my earlier post.

Leading up to this, it was difficult to determine whether it would be valuable enough to buy, since finding reviews out there proved quite difficult. There are also a plethora of online vendors selling kits, hardware and software, which confuses the potential buyer even more so. Anyway, I thought I’d write up a quick review summary of my own experience in purchasing a full diagnostics kit – especially in reference to the W205.

What’s it like, what do you get, what can you do, etc… so here we go, my take on the full diag suite – get a big glass or wine (or beverage of choice) and settle in for what is hopefully and enjoyable and informative read.
sd-connect-c4-package-1
1. What is it?

This kit is a full Mercedes Benz diagnostics system. In a nutshell the components of a full kit comprise:

A suitable computer (in this case a Dell630)

An Star Diagnostics Connect (SDconnect) 4 multiplexer

Various interface cables

Mercedes Benz Star Diagnostic Software

Rather than clutter this intro, refer to the below sections for more detail on each component. Do you need everything listed above to get started? .. no, probably not. In principle you do need all those parts to perform full diagnostics but you can purchase bits from various vendors and you may even have some existing bits or are able to source software from other avenues (let’s not get into that ).

The one thing you do get quite nicely with a kit like this is, out of the box plug-in and go functionality. No mucking around loading software, stressing over setups, keys etc. You buy, you get, you use. Simple.

2. Where do I buy it?

Well.. duh, the internet of course – just making sure you don’t go into your local MB dealership asking for a kit .. you know .

Who do you buy it from? .. that I cannot fully answer, since I purchased my first kit and hence have no relevant comparisons to draw. Arguably the Chinese are the No.1 player in this market. They are the ones who clone the hardware and are certainly the prominent purveyors of such kits at a price point which suits the average punter.

One thing I do suggest is that you strike up a conversation with your potential vendor of choice before handing over your credit card. Unless you speak fluent Mandarin or Cantonese, it’s handy to know that your vendor will be able to understand your questions in relation to support/warranty or other things (and believe me, you will have questions!).

The second main point is to determine how reliable you feel the vendor is. I know it’s difficult to judge. Nobody knows who’s who on the internet. My guiding principles were to look at vendors who had an established track record in terms of their web presence and had reviews stretching back several years. Anyway, enough said on that – do your research and don’t just go looking for the cheapest price.

So once your order is placed, a very short time later you will receive a nice brown box like this:

Everything seemed nice and safely wrapped.

Items removed, we had essentially all the parts I listed in the intro – plus a carry bag for the laptop, a very ordinary USB mouse, plus power adapter and cable to match your country (which was a nice surprise).

Overall – everything seemed quite OK and arrived safely. The computer was a tad old and cosmetically damaged (to be expected) but everything is fully functional.
OK, enough of the package – let’s look at each component in more detail.

3. The Computer (Dell Latitude D630)

The computer of choice for most vendors is a Dell Latitude D630. There are other options out there but this is by far the most common. Also on sale with most vendors is a Dell630 hard drive which is obviously the favored option if you already have a laptop to suit.

Note that the original computer equipment which MB Techs use are based on Panasonic hardware I believe (e.g. Toughbook), providing a touch screen interface. So this begs the question – why the antiquated Dell hardware? I don’t have a full answer but what I have determined is that it’s large due to historic dependencies. The Dell 630 was used for a long time due to the fact that it had a real serial RS232 serial COM port. With the previous generation of multiplexer units you needed that port.

With the advent of wireless and network cable connections to the multiplexer units, there’s no longer a reliance on the RS232 port and hence you can now find sellers who use IBM machines or EVG7 Tablet PC slate computers. The Dell is by all accounts an old reliable war horse which is cheap to get and source parts for, so it’ll probably be seen for a while yet.

4. The SD connect C4 Multiplexer

“What’s a multiplexer” I hear you mutter .. well, I’m glad you asked. The SDconnect is the communications interface between the car and the diagnostic computer system (i.e. the Dell). The unit sends fault detection data to the host computer and instructions back to the vehicle. In basic terms, it’s a tool that enables the diagnostic technician to examine vehicle functions, perform data coding and update vehicle software. It knows the communications protocols which the car utilizes to talk to the outside world. Like wow man! (hang on, I need to spin the propeller on my cap). Now, let’s carry on.

The SDConnect 4 is the previous generation multiplexer used on Mercedes vehicles. It is now superseded by the SD connect C5 and although they are starting to appear in cloned form, the c4 is still one of the most prominent cloned multiplexers out there. You can buy a C5 multiplexer if you wish (and for certain new hybrids vehicles you may have to), but for most W205 variants the C4 will do just fine. The SDconnect 4 is wireless enabled (via a plugin card; note not all vendors will sell it with this included, so buyer beware) or it can be connected via a network cable.

sd-connect-c4-package-2 sd-connect-c4-package-3
sd-connect-c4-package-3

The plastic end parts can be removed to reveal the slot for the WiFi card, plus the battery compartment and SD Card slot.

sd-connect-c4-package-4

Note that the battery compartment holds six AA rechargeable NiMH batteries to support powering the multiplexer whilst not connected to a vehicle. My unit shipped without batteries (boo!) which I then rushed out to purchase separately. Whether you really need to place batteries into the device is questionable however. There is no charger which ships with the multiplexer, so unless you use it a lot, the batteries will go flat quite quickly anyway. OEM equipment has a charger (which plugs into the RJ45 port) but I’ve never seen a single Chinese vendor selling one. In my tests I found that the unit seems to behave exactly the same, whether there’s batteries in it or not – although batteries do eliminate the “Low battery” indication which is otherwise shown on the LCD.

On the opposite side you will see the RJ45 network port for connecting your diagnostics computer (seen below on left with grey flip cover) and the MB proprietary cable connect (on right) which goes to the vehicle. For the W205, you will only need the OBD cable. The kit however comes with cables to suit all older style cars, trucks etc. as well.

sd-connect-c4-package-5

one thing that impressed me with this particular kit was the quality of the connectors and cables. Everything seemed very good I must say.

Top of the unit has a backlit LCD display, two LED indicators, and four buttons. The LCD indicates Power Supply status, Connection Type, and Working Status. The LEDs are used to indicate a variety of working status signals and the buttons give you the option to bring up information about vehicle or device battery status, display network addresses, put the unit into standby and so forth.

Essentially there is not much that the unit does on its own; not even an OBD scan or the like. It needs to be connected to the car and a computer to represent any value.

5. The Software

Now this is where the fun and games really start. Boot up your laptop and you’re soon presented with a Windows XP OS, which has obviously been customized to the Mercedes Software installed on the device. An early indication of that is the taskbar which prominently displays connectivity between the computer, the multiplexer and associated networks (e.g. internet/server) in the lower right of screen.

There is a lot to learn here for newcomers. The software changes very regularly (sometimes monthly) to keep up with the latest developments. Not surprisingly the vendors from China seem to have their finger on the pulse quite well in that regard. My kit contained December 2015 versions. I don’t think there’s any need for concern with constant updates however. If you can diagnose your car with the modules on-board then you’re good to go. The Workshop info will probably be one of the benefactors of regular updates but most of that service info is already in abundance, as you will see later.

Without writing the Never Ending Story here, let’s just say that the software suite is extremely comprehensive and caters for not only passenger vehicles but also trucks, buses, cranes – and other large industrial equipment dating back through the ages. To keep this piece relevant, I’m going to focus, as best I can, only on the bits applicable the W205.

I also will not go into the various configuration software components, such as installation, authentication, key security, registration, connectivity and so forth. If you are curious, feel free to PM me or do some Googling on the net because there is adequate information out there if you’re willing to look for it.

Let’s look at the main sub components to the suite that are of interest to us:

XENTRY Diagnostics
Not to be confused with XENTRY DAS (Diagnosis Assistance System; which was predominantly used with older vehicles – I think up to the W204). This is the primary diagnostic suite for the vehicle and probably the main software you would tend to use with a car like the W205.

Xentry allows you to delve into each control unit of your vehicle and see configuration data as well as run a very large number of diagnostic tests. It provides you with an exceptionally comprehensive diagnostic tool to see exactly what the various systems of the vehicle are doing.

What is exceptionally nice is that XENTRY also provides you with a full troubleshooting workflow; meaning that once you have run a test, found a fault, you can then delve straight into relevant maintenance references and associated documentation.

I’ve always owned workshop maintenance books for my vehicles, but have to say this system is by far the most well thought out and comprehensive. Not so say it doesn’t have it’s quirks, but it is not overly difficult to come to terms with.

As a side note, XENTRY also comes with a simulated variant (as a learning tool for working the software whilst disconnected from a vehicle. It allows the operator to generate simulated fault codes which you can then diagnose in XENTRY).

EWA Net
This is an intranet web server that hosts two important applications:

Electronic Parts Catalog (EPC)
A comprehensive listing of all vehicle parts; broken down into sub systems. It allows you to quickly build shopping lists of components (e.g. when needed for repair).

Workshop Information System (WIS)
An extremely comprehensive web information system which details the functional components of the car (categorized into sub systems again). It also comes with workshop instructions for performing almost every type of maintenance task, maintenance bulletins and a free set of steak knives.

The WIS is also equipped with several sub-application modules, which although not doubt hold lots of value in a workshop context, are otherwise uninteresting for an amateur user:

ASRA – a German acronym (for Arbeitstexte, Standardtexte, Richtzeiten, und Arbeitswerte). Provides info on work units and relevant documentation for conducting various maintenance tasks.

SSL module – another German acronym (Schadensschlüssel) meaning Damage Code.

MSS module (Maintenance Service System) which displays maintenance documents relevant to maintenance cases.

WSM module (WIS Service Media). This is probably the only sub module to WIS to remain of interest to persons other than MB staff. It contains a web link to a multimedia library for many maintenance tasks. Very cool.

Daimler AG Price List
This is an Access database for Mercedes Benz European parts pricing – equal parts scary and interesting!

What can you do?

So what’s possible with a kit like this, you ask. You would see by now, that the software will provide you with an astonishing array of information to come to terms with. I won’t say the possibilities are endless, but they are certainly vast.

From a learning perspective – you have everything you could wish for. Theoretically you could be satisfied with a copy of the WIS alone, since that serves as probably the most comprehensive learning tool for the vehicle.

From a diagnostics perspective – you will be satisfied with multiplexer and XENTRY. The range of tests which you can run and actuations you can trigger will let you fully examine each part of the car. You can generate detailed test reports, seeing when faults occurred exactly in each of the computer modules – and believe me, there are a lot of those. The W205 has upwards of 50 control units with each of those capable of logging and tracing out detailed errors and fault finding.

From a configuration (Adaptations) aspect, there are some minor things (often referred to as ‘Teach-in processes’) possible (e.g. Airmatic level calibration) but it isn’t a treasure trove for those willing to tinker with the vehicle (see next topic). One aspect I also didn’t delve into further within this review is that you can also configure and update module software from within XENTRY (a process called SCN Coding) which is only available online for the W205 (i.e. you need an authorized Mercedes user account to do so). There are Chinese vendors who will sell you a ‘session’ for online SCN, but it can get expensive quite quickly. In reality it is not something you would do other than to perform major update tasks (e.g. after replacing an ECU or other module) if the car was outside of warranty.

7. What can’t you do?

If you’re looking at ways to change significant default behaviors in the W205 vehicle systems (e.g. allow Video in motion, disable your start-stop, change variant codes etc. ) then you will probably be disappointed. MB has gone to some length to ensure that certain changes are extremely difficult to achieve. Offline coding was to a large extend abandoned with the W204 to guard against incorrect configurations. That’s not to say there isn’t a way, rather that these lock-downs are probably in place to avoid introducing configuration errors inadvertently during maintenance or by amateurs who don’t know what they’re doing.

There are more extensive changes possible with a software product called Vediamo, which is a factory tool used to perform complex black magic best not brought up in this review (makes sign of the cross; heck I’m not even religious!). Regardless of your skills in Vediamo, my research and impression leads me to believe that most changes also require Online SCN coding, which leaves you with little room to achieve known outcomes. Given that people do like to tinker or hack technology I’m sure this topic will become somewhat irrelevant in the future. Yes, people will find a way – whether that’s a good or a bad thing, I shall not judge.

8. Conclusions

So.. your glass of wine is empty and you’re wondering “What the the heck did I just read that for!). If you were to ask me again “Is it worth purchasing a kit like this for your car?” I would offer you an unreserved “Yes” – although with a disclaimer.

If you are the type of person who shows an interested in learning the in’s and out’s of your vehicle, then I can’t think of a better way than to own one of these setups. There is such a vast amount of content and useful reference material that it serves as a valuable library to learn more. Whether your goal is to perform self-maintenance, troubleshoot issues or simply to see for yourself what is going on inside of your vehicle, then this is without a doubt the toolset which allows you to do so.

If on the other hand you would prefer to say “here you go – fix it”, or perhaps rather be ‘told what’s wrong’ with your car, rather than ‘know what’s wrong’, perhaps you’re better off saving your dollars for other toys.

The W205 is undoubtedly a computerized marvel on wheels. Many of the systems and technical aspects of the car are completely obfuscated from the regular plebs like us. A diagnostic kit such as this certainly allows you to delve under the covers and go as deep as your curiosity wants.

How to use Xentry DAS on AVDI passthru

What is the AVDI recognized by Xentry?

Xentry Mercedes Passthru is different from from regular Xentry openshell. Xentry passthru does not use SDconnect toolkit. When you launch the program it will give you a dropdown where you can choose which J2534 device you want to use.

How to use Xentry Passthru?

If you got the Xentry Passthru installed, there is a tool which will do the dirty work for you.

Normally it is not linked or doesnt have desktop shortcut but resides (at least in my installation)
under

C:\Program Files (x86)\Mercedes-Benz\xentry\bin\SelectPTDevice

IF you have installed your passthru (would that be AVDI or anything else) with correct drivers, registry entries etc it will just present you with list of options and you select your VCI from dropdown list.

Heard good things about AVDI J2534 compatibility (real thing, don’t know about clones) so it shouldn’t be a big deal. Recently i have tried to use BOSCH KTS560 as passthru and it works perfectly okay.

For curiosity, i did also test the 20-euro MiniVCI that gets normally bundled with Toyota techstream packages. to my surprise it also works albeit slow and sometimes freezes the application. This one can be actually made to work even with old DAS like 2009, 2012….it’s just matter of proper settings in cal.ini and slave.ini

For DAS/Xentry users:

Old thread – but do not run the SetPassThruDAS.exe, as it was written for DAS/Xentry for Windows XP, and not Openshell or Xentry Passthru. All you need to do is install a fresh OS (Windows 7 Enterprise x86 or x64 SP1) ideally on a physical laptop, connect the AVDI device to the USB port and run the SetupInterface_yourserialnumber_PASSTHRU_xxxxxxx.exe and Next through the setup process. If you have a current version of the Passthru software, you will see a grayed out option for installing drivers for DAS that you cannot select, but do not be concerned about that. It will detect the AVDI, and install the appropriate J2534 dll files in the Windows\System32 directory. Then continue installing your Passthru software provided on the Blu-ray from Daimler. It will take a while to install, and once it verifies your hardware ID and installs your StartKey, launch Xentry Passthru from the icon it creates, and it will prompt you first thing as to what interface you want to use. You will see Abritus72 AVDI ABRITES Commander PT (your serial number here) in the drop down box. Select that device, and that is all their is to it. Xentry should automatically communicate with the vehicle.

Mercedes C4 Xentry Diagnostics Software No WIFI Connection

V2018.12 is the latest Xentry diagnostic and programming software for Mercedes Benz from 1989 to now. Mercedes C4 xentry /das software support programming offline and online.Some clinets buy the V2018.12 xentry diagnostic software and feedback that no wifi connection , here is the solution.

Client problem:
i insert there is no wifi ,pls help

Solution from OBD2TOOL.com tech support team:

When insert the new xentry software HDD, pls install the driver again.

MB-STAR-C4-WIFI-1 MB-STAR-C4-WIFI-2

After install the driver, you can connect the wifi successfully.

Mercedes offline programming/coding tips and guides

Mercedes offline programming/coding recommendations and guides:

Offline coding:

SCN or CVN coding was added to the automobiles back in 2003 if not earlier . The idea of OFFLINE coding was to become capable to create SCN codings whenever you don’t have an world-wide-web connection at your workshop to be capable to execute this on-line. In both situations an SCN or CVN coding was necessary.
Let’s not confuse OFFLINE coding with basic CODINGS !

Codings could be completed with standard DAS or Developer DAS extra deeply. Coding doesn’t imply that you just need to replace your unit application totally. When you have to produce an Offline coding this implies to flash your unit with an updated application version or a minimum of exactly the same version which you have got currently (not sure in the event you will likely be capable to downgrade your software) and after that SCN code that a single to be activated within your auto. I’m not conscious of any car or truck which is usually OFFLINE coded without having the request for an SCN code.

The only good point right here will be the time required to perform this. Yes , you can make OFFLINE coding together with your technique then go back for the dealer and ask them to produce an SCN coding for you…however are u sure they’ll not charge you the same amount as if it was done in their workshops ?

The internal VIN of this auto (e.g.w211): is WDB2110261AXXXXXX

The first letter of the external VIN after “WDB” gives the physique style, like
– U for MB implies 211
– F signifies Sedan
– next two digits will be the model inside the body form, appears to be a direct copy in the internal VIN
– subsequent digit is in regards to the SRS system, I’ve found explanations as much as the letter F, so this auto should have additional SRS equipment than known when my reference was drafted
– position 9 is actually a verify digit and the tenth digit comes from the model year.

It is considerably a lot easier to seek out this if you enter the external VIN to EPC and let it decode the internal VIN for you personally. Then choose up digits 4-9.

Ps. 17-digit code & 6 digits of numbers

das-6-1 das-6-2 das-6-3

Office programming:
For those who want to program ecu ‘offline’, there are several options:
1. In DAS, you are able to program ecu’s offline. (In xentry, you have to buy xentry calculator.)
2. Vediamo may be the way to go to program ecu offline and is used by daimler factory
3. Should you want only for 204.041 as above, you are able to try to use 204 in DAS. and there is free offline programming
between those three options, vediamo could be the best and could be used for 99% vehicle’s model

Noe that: For those with Star diagnosis for 100usd around. DAS is your way to go.

DAS (older models before 2011, but still most cars communicate through this program)
Xentry (new model automobiles 2011-2016)

Should you set it up correctly, it is possible to program offline in DAS only. Then if we need to go online with DAS we switch the modified flash folder to the original.

Xentry there is no offline programming, only on the internet. Obviously, you need to have login and pass to go on line.

Btw, offline programing is an ancient way from the service,..nowadays its better to use on-line services,…its safety,..and quickly

The last, how to enable DAS for offline programming:

Option 1: (try on your own risk)

It’s very very simple to enable “Offline” programming in newest DAS version

copy this file to

F:\Programme\DAS\trees\pkw\flashen\ini

(click yes, to replace existing).
And Be Happy !!!

in case you not have this function for any concrete automobile – verify initially six VIN digits for this automobile, and add to this file in model section.

for sample – to enable option for WDD221054 – add text string to file :

221.054=YES

Option 2: (try on your own risk)

Open F:\Programme\DAS\trees\pkw\flashen\ini on the notepad and add ->
1st of all
—-A451—-
451.331=YES
451.332=YES
etc
etc
etc

IMPORTANT!!!!!!!

The options above are diy solutions from DAS users.

TRY ON YOUR OWN RISK.

NO A single HOLDS RESPONSIBILITIES For you.

If solutions above remain useless or you want a solution WITH SECURITY, please try option 3, the idiot solution.

Option 3: (use with relief and security)

Spend a little bit money on an enabled DAS for offline programming.
mb-sd-c4-1 mb-sd-c4-2 mb-sd-c4-3 mb-sd-c4-4

Though the DAS 2012.11 version is kind of old, this is definitely the one we highly recommend. It has been tested for thousands of times on vehicles, verified to work definitely.

And it also could be come with the full package V2012.11 MB SD Connect C4 with DELL D630 laptop, very convenient for customer who do not have DELL D630 laptop or do not know how to install software correctly.

This will save a lot of time for urgent needs. That is, users can directly use this set for offline programming when they receive the package (including setup offline mode in old DAS software program) and open the function. But they need set up WIFI and Lan cable connection by themselves if wanna do on-line programming.

In short,
For offline programming,
DAS 2012.11 is definitely the best solution for old automobiles before 2010.

For on the web programming,
You can use the latest version 07.2018 or 09.2018 Xentry program for the old and new cars.

How to do Offline Coding & Programming with DAS

Mercedes offline programming/coding tips and guides:

Offline coding:

SCN or CVN coding was added to the cars back in 2003 if not earlier . The idea of OFFLINE coding was to be able to make SCN codings when you don’t have an internet connection at your workshop to be able to perform this online. In both cases an SCN or CVN coding was required.

Let’s not confuse OFFLINE coding with simple CODINGS !

Codings can be done with regular DAS or Developer DAS more deeply. Coding does not imply that you have to replace your unit software completely. If you have to make an Offline coding this implies to flash your unit with an updated software version or at least the same version which you have already (not sure if you will be able to downgrade your software) and then SCN code that one to be activated in your car. I’m not aware of any car which can be OFFLINE coded without the request for an SCN code.

The only good point here is the time needed to do this. Yes , you can make OFFLINE coding with your system and then go back to the dealer and ask them to make an SCN coding for you…however are u sure they will not charge you the same amount as if it was done in their workshops ?

The internal VIN of this car (e.g.w211): is WDB2110261AXXXXXX

The first letter of the external VIN after “WDB” gives the body style, like
– U for MB means 211
– F means Sedan
– next two digits are the model within the body type, seems to be a direct copy from the internal VIN
– next digit is about the SRS system, I’ve found explanations up to the letter F, so this car must have more SRS equipment than known when my reference was drafted
– position 9 is a check digit and the tenth digit comes from the model year.

It is much easier to find this if you enter the external VIN to EPC and let it decode the internal VIN for you. Then pick up digits 4-9.

Ps. 17-digit code & 6 digits of numbers

das-6-digits-numbers-1 das-6-digits-numbers-2 das-6-digits-numbers-3
Office programming:
If you want to program ecu ‘offline’, there are several options:
1. In DAS, you can program ecu’s offline. (In xentry, you have to buy xentry calculator.)
2. Vediamo is the way to go to program ecu offline and is used by daimler factory
3. If you want only for 204.041 as above, you can try to use 204 in DAS. and there is free offline programming
between those three options, vediamo is the best and can be used for 99% vehicle’s model

Noe that: For those with Star Diagnoses for 100usd around. DAS is your way to go.

DAS (older models before 2011, but still most cars communicate through this program)
Xentry (new model cars 2011-2016)

If you set it up correctly, you can program offline in DAS only. Then if we need to go online with DAS we switch the modified flash folder to the original.

Xentry there is no offline programming, only online. Obviously, you need to have login and pass to go online.

Btw, offline programing is an ancient way of the service,..nowadays its better to use online services,…its safety,..and quickly

The last, how to enable DAS for offline programming:

Option 1: (try on your own risk)

It’s very simple to enable “Offline” programming in newest DAS version

copy this file to

F:\Programme\DAS\trees\pkw\flashen\ini

(click yes, to replace existing).

And Be Happy !!!

if you not have this function for any concrete car – check first six VIN digits for this car, and add to this file in model section.

for sample – to enable option for WDD221054 – add text string to file :

221.054=YES

Option 2: (try on your own risk)

Open F:\Programme\DAS\trees\pkw\flashen\ini on the notepad and add ->
First of all
———-A451———-
451.331=YES
451.332=YES
etc
etc
etc

IMPORTANT!!!!!!!

The options above are diy solutions from DAS users.

TRY ON YOUR OWN RISK.

NO ONE HOLDS RESPONSIBILITIES FOR YOU.

If solutions above remain useless or you want a solution WITH SECURITY, please try option 3, the idiot solution.

Option 3: (use with relief and security)

Spend a little bit money on an enabled DAS for offline programming.

mb-sd-c4-1 mb-sd-c4-2 mb-sd-c4-3 mb-sd-c4-4

Though the DAS 2012.11 version is kind of old, this is the one we highly recommend. It has been tested for thousands of times on vehicles, verified to work definitely.

And it also can be come with the full package V2012.11 MB SD Connect C4 with DELL D630 laptop, very convenient for customer who do not have DELL D630 laptop or do not know how to install software correctly.

This will save a lot of time for urgent needs. That is, users can directly use this set for offline programming when they receive the package (including setup offline mode in old DAS software) and open the function. But they need set up WIFI and Lan cable connection by themselves if wanna do online programming.

In short,
For offline programming,
DAS 2012.11 is the best solution for old cars before 2010.

For online programming,
You can use the latest version 07.2018 or 09.2018 Xentry system for the old and new cars.

Mercedes Benz Engineering Software DTS-Monaco Download Free

DTS-Monaco as MB Star Engineering Software support Mercedes Benz programming offline. Where to got DTS V8 monaco software? Obd2tool.com share DTS Monaco Download Link Here.

DTS V8 Monaco Download Free:

https://mega.nz/#!JB1zALzY

DTS Monaco just for download Free unknown security.

What is DTS-monaco?

DTS Monaco enables the comprehensive testing of diagnostic communication, diagnostic data and diagnostic sequences in the areas of engineering, testing and preparation of manufacturing tests. It can be adapted flexibly both for a whole range of different test tasks and for different user groups.

Which MB sw version comes with DTS-monaco?

Mercedes Benz Star Daignostic Software 2018, 05-2018 (newest)

20-1
05.2018 Xentry software version Mercedes Benz Engineering Software DTS Monaco Download Free

Obd2tool.com Kindly note: we do not offer after-sales for the product from other suppliers, need any help pls keep your order number ask for help. Thanks.