Look here: How to use VAS6154 head with Porsche Piwis 3
project PIWIS3 PT3G => VAS6154-Kolun a
look at below link when you take your right to use
1 have to have installed piwis 3 laptop.
2. install piwis 3 driver
3 put together vas6154 install the drivers for vas6154-piwis // attempt to update interface Flesch
, if you see 6154 as pt3g then it is ok if nevidi next step =>
4 separated you from laptop
5. Copy the deteskop and install VAS 6154 driver 220.127.116.117 // installation after installation tend to deteskopa the trash
6 interface connects you 6154
7 program you run driver
8 interface you see 6154
9 select USB. Save.
11 tart driver program tach app (the first option above left) choose passthru> pt3g-3 piwis install seeks interface.
13 Interface joints run driver VAS6154 seen as a passthru pt3g update memory device, check the USB version pt3g dal see you ok almost 6154
Note: please be careful and do it on your own risk.
obdii365.com will not give support
Update: Unless you find the 08 firmware
The picture below is VAS 6154
For sake of security, you’re advised to use odis with vas6154 and use piwis with porsche tester 3
Piwis III V37.250.020 – confirmed to work no issues with Vxdiag Porsche
Diagnostic test: passed
attached VAS 6154 driver download, installation instruction, wlan setup….