Vediamo Not connect to SD Connect C4 Problem

Problem:
I have sd connect c4 multiplexer.
It works great with Xentry with cable connection.
O/S: Windows 7 64 Bits.

But Vediamo V05.00.05 has issue connecting to MB SD C4.
After opened up Vediamo, I press on update. Then, i got error message

“The Caesar-Hardware Part A / Part C (ISA) / Part Y is not supported under Windows (7) – 64Bits.”

Possible reason :
Vediamo is not compatible with Windows 7 64 bit operating system.
Solution 1:
Solution 1 is provided by customer.

“I just fixed it.

There is no Part D needed. or Part …etc.

All i did is, change Device ID 0 to 01 in INI file
Because my SD C4 is 01 .

I modified Vediamo_c.ini in ProgramData/Vediamo/Config

You will see 3rd Line from top, DefaultDeviceNumber=xx

Change xx to your device number.

Hope this helps!!

Solution 2:
If solution 1 does not work, please change another laptop with Windows 7 32-bit. OBD2TOOL engineers have tested Vediamo and MB SD Connect C4 on 32bit system perfectly.