China auto diagnostic tool center–About OBD2 Things:such as Launch X431,Autel tools,Autoboss
I had a power steering control module replacement on this vehicle – 2013 Ford Mustang GT 5.0 liter V8 engine. The original module is currently not available. I need to find the info or as built data and push it into the new module. The following shows how to program
Autel MaxiIM IM608 Scan Tool is able to successfully program a used Transmission Controller (EGS Reset) for 2015 BMW X3 via OBD. Below I will show how to do it. Problem This is a 2015 BMW X3 with a 3.0 turbo diesel engine. This car will have a gearbox swap
To program or code Mercedes VGS2, Autel IM608 could also do this job beyond MB C4 with Xentry. Here we share some tips on how to use IM608 The Procedure will be divided into 4 steps: * Renew donor * Copy data from old and backup coding * Rewrite data and
Problem: 2014 Ford F-150. PCM was replaced. I did a parameter reset with autel im608 and the error codes will not clear for the following: P0315:00-AF – Crankshaft Position (CKP) system variation not learnt. P1639:00-2F – Vehicle ID Block Corrupted, not programmed. With the CKP I’m certain the repair shop
This is a successful demonstration on how to add two new keys for Hyundai Santa FE 2010 by Autel IM608 when all keys lost. Let’s start it from the key decoding. Tools: LISHI Decoder Autel MaxiIM IM608 Xhorse Dolphin XP-005 key cutting machine MINI Key Tool XSKF01EN smart key Step 1.
Already made a key for this in the past and the customer lost their key. We had the password so we were able to generate a new key for them. Today, we have a 2005 Mercedes-Benz C240 we made a key with Autel IM608 for this in the past, but
Feedback: BMW 1 series 2007 -AKL (add keys lost) Removed ECU, read ISN from ECU on the bench using Gbox2 and Autel MaxiIM IM608 (connection diagram is on the programmer),(taken a pic of ISN), reinstalled ECU, went to IMMO on 608, did AKL and entered ISN from ecu, used “code
I have added a smart key (5 buttons) to a Jaguar F-Pace year 2016 using Autel MaxiIM IM608 today. It is kvm out job. A safe and emotionless work. Mask 1M12S MC9S12XEQ384. The Auteltech lists only F-Pace from 2017 to 2018. I did a 2016 model no issue. Remove KVM module
Hey guys, we are gonna use Autel MaxiIM IM608 to add a new key for 2014 BMW F012 with 868MHz Frequency via OBD. Let’s go! So, enter “IMMO”. Accept the disclaimer. Tap “BMW”. Smart selection. It will scan the CAS4/CAS4+ immobilizer system, DME engine system, EGS transmission system. Tap “OK”. Go
Question It is always the same when I am using Autel MaxiIM IM608 + XP400 Key Programmer to make automatic detection for a Mercedes Benz key. It says “Chip communication failed. Please check whether the chip is placed correctly or in good contact” What is the problem? Please help me! The